How to change the cds in toyota avalon 2008 limited have 6 cd changer but i dont know how to change it

SOURCE: toyota avalon csx 2000 cd player

I had the same problem. It is probably the laser reader for the CD player. I took it in to the dealer and was referred to a vender as the warranty had expired. I took it the vender 10 days ago and just had it re-installed today. Works well. BTW, the dealer took it out and send it to another company which repaired it and sent it back.

SOURCE: stock 1997 Ford Explorer 6 CD changer stopped playing CDs

We finally realized that all of the "advisers" on the internet want to charge for their advice, and their advice in this case is univerally that the unit should just be replaced. Ya think?! Could of figured that one out on our own.....what a joke...

Frank Fulton

• 1114 Answers
• Posted on Sep 30, 2009

SOURCE: 6 CD Changer Stuck (Lexus LX 470)

Open the eject door and at the lower right side of the cartridge their should be a small indent that looks like you could poke it with a medium point pen. That's a reset for the changer. If that does not work, you will need to remove the changer from the car, pull off the top, plug the cable back in and hit eject. look for the arm on the backside of the cartridge and give it a nudge. It may just be stuck. Loading mechanisms usually do not fail before the optics or other!. If you need further help, post a comment with any model #'s on the changer and I'll look for info and help some more. Hope this helps.

Frank Fulton

• 1114 Answers
• Posted on Oct 03, 2009

SOURCE: 2007 Toyota Camry Hybrid CD changer jammed, one

Take it to any local car audio shop, find out the make of the changer and chances are good that it can be fixed quickly and at a minimal cost or replaced with an aftermarket unit that will work perfectly with the factory radio for under 600 installed easily. Hope this helps

Testimonial: "I think I will attempt a fix myself first. "

SOURCE: what is the toyota number for the cabin air

The cabin air filter is actually pretty easy to change. Here are the steps:

1. Set the air conditioning system to Recirculation. The case for the cabin air cannot be removed with the system in the Outside Air mode.
2. Turn the engine off.
3. Open the Glove Compartment
4. unclip the damper rod on the ride side of the glove compartment. To unclip it usually it is just a squeeze tab but sometimes it is a phillips head screwdriver.
   
5. The glove compartment now must be squeezed together at the rear to allow the tabs to be released. Just let the glove compartment hang down.
   
6. Through the glove compartment opening, locate the filter cover and remove.
7. Remove dirty filter and replace with the new and reverse steps 1-5 to put it back together.