If you can get a scanner then reset the CPU program first as the program is probably corrupted from battery removal/ dead flat.
SOURCE: 2001 Toyota Corolla high beam lights are not
Your switch must be working since your indicator is telling you when the high beams are on, so my guess is that your bulbs are faulty. The high beam part. They probably burnt out one at a time, so you didn't notice until the second one went. Change your bulbs, and see if that solves it. If not, let me know.
SOURCE: I just had a few warning lights come on in my 08
Hello. Those three lights are all designed to illuminate when you have an issue with the electronic sensors on the engine. To properly identify the reason for the lights being on, you will need to get your vehicle hooked up to a scan-tool. AutoZone provides this service for free. Get the car scanned, and get the codes stored in the memory of the car's computer back to us for further assistance.
SOURCE: malfunction indicator lamp in my toyota corolla is on how i fix?
The check engine light also called the malfunction indicator comes only when the computer control unit (called the PCM) senses a fault in the electronic controls of the engine and/or the emission system, there are about 200 possible faults that turn the light on, to know what has developed a problem you must have the system tested, this is called an OBD2 fault code test, Kragen and Autozone parts stores do this testing for free.
In the table below you'll find the fuse location and description of the fuses of the driver side under-dash fuse box on 1.6L and 1.8L 1993-1996 Toyota Corolla.
345 views
Usually answered in minutes!
×