Where is the number 1 cylinder on a 2003 mazda tribute?

SOURCE: What is the Firing order to find the #1 cylinder on Mazda Tribute

#1 cylinder is on the back of the motor first one to the ritght. On the driver's side. the cylinders go 1,2,3 fromright to left on the back of motor as stand facing the vehicle and 4,5,6 left to right in the front of the motor as you face the vehicle. Hope you understand what I'm telling you.
Good luck,Dan

michael schultz

• 1068 Answers
• Posted on Sep 23, 2009

SOURCE: 2003 mazda tribute engine light diagnoise said its

i looked on alldat and there is nothing there on lettered coils just numbered! sorry but if i had that issue come into the shop and the custom said what you said i would assume that it was number 1 also and say if i didn't have a scanner and had to figure it out (blind) i would start at the number 1 coil and pull it out of the hole while it was running and while i was wearing thick rubber gloves and see if it made a diffence to the motor idling right. if not then that is the one but if it effected it then i would go to the next coil and do the same thing and so on. till i found the one that didn't cause the motor to mis fire or idle different or more. and change that one! hopefully that helps. best i can do over the computer at night with out the factory software in front of me.

Testimonial: "thanks for your prompt response. You were very helpful. "

SOURCE: 2003 Mazda Tribute will start, idle rough for a

check the fuel filter air filter and vacuume lines if they all good make sure the spark plugs are making a bright blue spark

SOURCE: please describe how to locate

HI look at your vin # on front windshield driver side 8th digit 2.0 engine is letter b 3.0 engine is #1

SOURCE: i have a code misfire cylinder 3 how do i know

Here is the firing order. It shows the cylinders and relationship to front of vehicle

Good luck, Jim