Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Apr 25, 2014

Where are the fuses for raditor fan switch by clio grende

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Raditor fans not working?

If its electric then make sure all the words are connected. Usually there is also a fuse that may be blown check underhood for fuse or in door.
0helpful
1answer

Niether of my raditor fans turn what should i check first

Short out the thermostatic switch on the radiator. If the fans turn then, the problem is the switch. If not, check the fuses or there could be a relay that is not working, check the hand book or the fuse box for the location of the fuse and the fan relay.
2helpful
2answers

Overheats raditor cleaned and flushed no power to fan 94 mercury

try the fan tempature sending unit. it tells the fan to come on at certain tempature if it went bad it wont tell the fan to come on
1helpful
1answer

Overheating

Is the fan now working? Your engine will continue to overheat if you have not fixed the fan. Check the fuse for the fan, connectors, and replace the fan if necessary.
1helpful
3answers

I have a Kia Sephia 01. I had my engine over heat and warp almost everything. i've tried replacing the thermostat housing three times but everytime i refill the coolant and it runs through the housing it...

Likely you are overtightening the housing. If you have paper gasket type, try using a double gasket. If "o" ring type, just use the gasket. When tightening the housing take up small amounts on both sides, alternating from one to the other. Tighten till it is firmly mounted but stop there. After filling system, check for leakage. if seepage is noted, take up on bolts one quarter turn or less till drip stops.always alternating from side to side. Unless you have the wrong thermostat in there this pretty much has to work.
3helpful
1answer

I have a 2003 PT cruiser having trouble overheating when i unplug the heat sensor the cooling fan goes on , when plug it in it shuts off

1 Inspect Hose Ruptured, Cracked or Leaking Raditor Hose. 2 Inspect Head Gasket Leaking Head Gasket. 3 Inspect Thermostat Thermostat Stuck Closed. 4 Inspect Raditor Cap Worn or Damaged Raditor Cap. 5 Inspect Raditor Raditor Fins Obstructed. 6 Inspect Belt Missing or Broken Water Pump Belt. 7 Inspect Heater Core Heater Core May Be Leaking Antifreeze/Coolant into The Vehicles Floor Area. 8 Inspect Intake Manifold Gasket Leaking, Worn, or Damaged Intake Manifold Gasket. 9 Inspect Cooling Fan Switch - Raditor Faulty Raditor Cooling Fan Sensor/Switch. 9 Inspect Water Pump Leaking Water Pump. 9 Inspect Raditor Fan Motor Faulty Raditor Cooling Fan Motor. 9 Inspect Relay - Raditor Cooling Fan Motor Faulty Cooling Fan Relay. 9 Inspect Fan Blade Broken, Missing, or Faulty Fan Blade(s).
3helpful
3answers
0helpful
2answers

Cooling fans not kicking in at high temperature.

problam could be with your coling temperatuer sensor .make sure fuse for you raditor fan is good.and you have coolant in you raditor.
Not finding what you are looking for?

40 views

Ask a Question

Usually answered in minutes!

Top Renault Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...