Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Apr 18, 2014

Variable skid control light came on my 2007 Toyota Hylander after service and won't shut off

4 Related Answers

Anonymous

  • 9 Answers
  • Posted on Sep 22, 2010

SOURCE: 2006 Toyota Avalon Limited, 70,000

charc, cansiter vsc comes on with check engine light

Ad

steven spiegel

  • 235 Answers
  • Posted on Jan 04, 2011

SOURCE: The maintenance light came

If you have not changed your oil in awhile i believe it could be that or the manufacturer has set up a warning light to remind the operator that it is time for a certain maintenance issue . Call the dealer service department and they will give you the info that you need. Make sure you write down your mileage before you call because you will most likely need it so they can give you the proper info.

David Jewell

  • 454 Answers
  • Posted on Apr 05, 2012

SOURCE: Why won't my cargo light go off on my 2007 Toyota

Two possibilities:

1. The switch on the light is set to be on all the time.

2. The door switch is not functioning correctly. Find the switch and try depressing it manually and see if you can get the light to turn off. If so, replace the switch.

jmacn1

jmacn1

  • 58 Answers
  • Posted on Feb 23, 2013

SOURCE: my 2007 toyota door light won't go off will it drain battery?

yes over time it will kill the battery
check the door switch
some head light switches have a position that keeps the interriier lights on

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

What are the probable causes of DTC C1340?

It is a bad connection within your lock differential controller. You may need a new skid control ECU. Definitely a job for the shop.
0helpful
1answer

2008 Toyotal Hylander Hybrid Limited won't start, display shows check VSC system, check SRS Air Bag system, check brake system, have vehicle service by Toyota Dealer immediately

you can try this take the battery off. neg wire and leave off for an hour or so then put back on. if when you but back on and every thing is fine then the system management controls all electrics has had a fault. this can be static discharge fault... while the battery is off give it a good charge.
0helpful
1answer

O7 yaris starts then shuts off

Engine stalls soon after starting
1. Fuel pump control circuit.
2. Spark plugs.
3. Ignition system.
4. Fuel Injectors.
5. Variable valve timing system.
6. Electronic throttle control system.
7. Air induction system.
8. PCV hose -
9. Compression
0helpful
1answer

Vcs light

Hello, the skid control/trac lights will turn on when the check engine light turns on, they usually go off when the check engine light malfunction is fixed first. There are some diagnostic codes in the engine control module, if you live in the US you can go to any one of the national autoparts stores and they can get the codes from the computer for you, they will also give you a recommendation as to what the problem may be, if you have any questions after that just reply to me and I'll be glad to give you my opinion
0helpful
1answer

2007 AVALON DOME RIGHT DOME LIGHT WON'T GO OFF. ALL DOORS ARE SHUT

I would unscrew or remove each switch from door jam and disconnect wires till light went out and replace that switch
3helpful
1answer

VSC light is on

The VSC (Variable Skid Control) function is automatically activated by the onboard computer of the vehicle. When the light is on the system is activated. If the light remains on it means that you are constantly driving on road conditions where the computer thinks you are skidding or it has failed to deactivate for some reason. Possibly a malfunction with a sensor or computer. It is best you take the vehicle to a Toyota Dealer to have it checked out.

Lewis
0helpful
1answer

The maintenance light came on for my 2005 Toyota Hylander, need to know what it could mean.

If you have not changed your oil in awhile i believe it could be that or the manufacturer has set up a warning light to remind the operator that it is time for a certain maintenance issue . Call the dealer service department and they will give you the info that you need. Make sure you write down your mileage before you call because you will most likely need it so they can give you the proper info.
2helpful
1answer

1998 Lexus Ls vsc light is on want to know what is it

Vcs means "Vehicle Stability/skid Control".Variable Skid Control is a part of your brake system. It is indicating that it senses a problem with your brake system.Get the car scanned at autozone service center.Its absolutely free at autozone to get car scanned.In scanning it will show the error codes as per that you can get the parts replaced.Also if in scanning,if no codes are shown ,then also get your brake system inspected. ----------- This will help.Thanks.Helpmech.

0helpful
1answer

2007 toyota camry

The VCS (Variable Trac Control System) might've been disengaged by the computer, meaning it is actually not working at the time, and needs to be reseted at TOYOTA. You may still drive your vehicle like usual, but in caase of a skid or hydroplaning, the VCS will not engage, and probably resulting in a oversteer, and, may forbid, an accident. So you might wanna go ASAP to get that verified by TOYOTA.

Levy
Not finding what you are looking for?

100 views

Ask a Question

Usually answered in minutes!

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...