1992 Honda Prelude Logo
Anonymous Posted on Mar 23, 2014

Brake dash light stays

Brake lamp is on every time i start the car.

  • David Gerzseny
    David Gerzseny Apr 16, 2014

    On some models this can also mean your pads are low. But I am sticking with the emergency brake solution as the number one solution.

×

1 Answer

John

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Cheetah:

An expert who has answered 20 or more questions within one hour.

  • Contributor 42 Answers
  • Posted on Apr 15, 2014
John
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Cheetah:

An expert who has answered 20 or more questions within one hour.

Joined: Jun 27, 2013
Answers
42
Questions
1
Helped
6958
Points
64

Look under dash at the top of your brake pedal. See the button switch, that the pedal pushes in. Push in and out by hand a few times. Put a dab of oil on your finger, put on button, and push in a few times by hand

  • David Gerzseny
    David Gerzseny Apr 16, 2014

    Usually that is for the emergency brake. Put it on and off a few times and see if that fixes the problem. The switch under the dash on your brake peddle is for your stop lights so that has nothing to do with the dash light that says "brake". It is not the "abs" light is it? That means the sensors on the wheels are corroded from salt and shorting out. They need to be cleaned or replaced.

  • safefun4u Apr 18, 2014

    I agree with D G, hand brake switch possibly sticking. If the brake light is yellow the problem is in the ABS system, if the light on the dash is red it needs attention urgently. Check the fluid level in the brake reservoir if low, either your brake pads are worn, which drops the fluid level till the red warning light comes on, or you may have a brake fluid leak. If a leak it is dangerous to drive. Either way I recommend you repair the problem before driving. Brake problems are not to be taken lightly, that's why the manufacturer has warning lights on the dash to alert you.

×

5 Related Answers

Richard Finch

  • 397 Answers
  • Posted on Aug 14, 2008

SOURCE: brake lamp light

Two things spring to mind, first your front pad wear indicators are telling you the pads are down to their limit and second and most important it could be a drop in the fluid level in the master cylinder, if it is a drop in the fluid level this would indicate a leak somewhere, the usual place is a rear wheel cylinder.
It would be wise to get this checked out quickly because if it is a rear wheel cylinder it is very simple to replace and not terribly expensive, also if you get it done quickly you will reduce the chance of brake fluid contamination on the rear brake shoes which will mean replacing them as well.

Ad

Anonymous

  • 4 Answers
  • Posted on Oct 29, 2008

SOURCE: 89 honda prelude

I know this sounds silly but did you check your bulbs? does it say brake lamp or brake>?

Anonymous

  • 1 Answer
  • Posted on Jan 27, 2010

SOURCE: Brake light in the dash stays on all the time. Not

Check the third brake lamp. See if it's still good.

Kevin Daniels

  • 1463 Answers
  • Posted on Nov 20, 2010

SOURCE: why is the brake lamp

You either have a blown brake bulb, your handbrake indicator is stuck or you brake master cylinder is low on fluid.

Goofguyster

Layne Johnson

  • 379 Answers
  • Posted on Mar 22, 2013

SOURCE: Brake lamp light on dash won't go off.

check your brake fluid level also check to see if one of your bulbs are out

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Brake lights will not go off , and cruise control does not work 2005 chevy trailblazer Brake lights refer to lights in rear of car, if it was the dash lights i would have said the brake lite warning

brake lights in rear of car? or brake lamps in dash? ??cluster.ABS? I can't see where your eyes are looking.
if rear lamps fail IN ANY WAY, that kills dead Cruise by design. so fix rear brake lamps first.
so fix the brakes in your other post.
and your engine is
4.2Liter, inline 6, 2 cams, 1 cmp and has VVT
and VVT is failing I BET!
I'd fix the engine first, for sure VVT failing
is never good and for sure if cam is now out of time by 25degrees.(VVT stuck hard max , jammed)
tell here eyes are looking and win

brake lamps will not TURN off.
brake lamps stuck on all the time.?
they never need key on to use brake lamps.
the brake fuse is hot all the time. is why.
and is a safety rule this ,just like head lamps.work key off.
if stuck on rear brake lamps
pull the switch, plug at pedal switch
stuck on NOW????????????????????
1helpful
1answer

Hi, my brake lamp stays on after turning ignition on in honda accord 1988 carb despite all brake lamps are working fine no burnt one, I appreciate your help

Majdi, if you mean the brake warning light in the dash is on after starting your car, the light is telling you there is a fault/problem with the braking system. You should not continue to drive if the brake warning light is on, as your brakes could fail. You will have to have a good shop check your brakes and diagnose problem and estimate repair. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Brake lamp warning light Honda Tech
Parking Brake Warning Light
What Causes the Brake Warning Light to Come on
http://honda-tech.com/honda-accord-1990-2002-2/%22brake-lamp%22-light-went-meaning-problem-1723211
0helpful
1answer

Is this a speed censor problem

no year, car, are you kidding??? NO YEAR?
that makes any answers impossible.
speedo dead, but is odometer too?
gas gauge dead,
ABS full time failure
Brake lamps same (in dash or rear tail lamps too?)
does car drive?
does engine run.
is the CEL lamp on driving? check engine light or SES lamp.?
sorry for 20 questions but its a complex machine, and me blind. .
0helpful
1answer

Alt. and brake liht on dash

the alt glows, when the charge system fails.
belt feel off? or engine RPM way below 800rpm hot?
or bad, battery, wiring or alt.,

the brake lamp comes on for every key on, for self test.
and at each engine stall. this is NORMAL.
the brake lamp warning glows usually for 4 reaons.
1: hand brake stuck on, or its switch.
2: low brake fuild.
3: front or rear brakes have failed (the balance switch)
4: ABS if fitted, is having , well Fits.
0helpful
1answer

My brake lights in 1995 honda prelude wont turn off even when the cars off, i have to dislocate the negative on my battery every time i park it. and my dash where the gas gage and temp gage are also wont...

U may have a faulty "brake lamp switch" normally located under your brake pedal, that's probably the cause of brake lights staying on. Check your fuses,,could be blown
0helpful
1answer

When i push brakes yellow warning light cenrte dash comes on and stays on

It's an yellow warning indicator lamp. It lights when brake pads are weared. Now it's time to replace the used brake pads!

tdisline_441.jpg

1helpful
1answer

Keep blowing fuses that control dash lights, chime and tail lights not brake lamps?

remove all the lights front and rear and try it if the fuse blows its a wiring problem, then its a matter of tracing and checking , time consuming, if the fuse stays ok there is another draw on the circuit, start checking ground connections
0helpful
2answers

Warning light on dash stays on, I don't have a manual to refer to

Your brake light is out.
Check brake lights and repl. burnt light bulb .
0helpful
2answers

Brake light in the dash stays on all the time. Not E-brake light. 92 Accord EX.

could have some bad brakes,air in the system,try bleeding the system see if that fixes the problem
1helpful
1answer

How to reset the brake lamp warning indicator and chime

The light will go off as soon as the light or the circuit to the light is repaired, if it is still on and the brake lights work correctly, meaning bright normal not dim looking then the monitor for the lamp out warning is defective, they are very pricey would take the bulbs out if i where you.
Not finding what you are looking for?

125 views

Ask a Question

Usually answered in minutes!

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...