ABS LIGHT AND TRACTION CONTROL LIGHT ON DASH

by fixing the problem test for a faulty/failed abs sensor or damaged /disconnected sensor-circuit

The light being on means the system has detected a problem in one or more sensors. The vibration is the ABS modulating the brakes to prevent skidding because it has detected a wheel that is locked up. That wheel is most likely the one sensor that is giving you the error.

have the code pulled from the computer to find out what set the lights on.the traction control works off of the abs sytem and so if theres a problem its not uncommone for both lights to come on.the brake light and abs lights on at the same time means there is a possible serious problem

HAVE VECHICLE CODE SCAN,SOUND LIKE YOU HAVE PROBLEMS WITH ABS BRAKES AND THE TRACTION CONTROL,SEEM LIKE YOUR AIR SHOCKS ELC HEIGHT SENSOR COULD BE BAD CAUSING AIR SHOCKS TO OVER EXTEND CAUSING CAR TO RAISE HIGH ON BACK END.WHICH COULD BE THE CAUSE OF ABS AND TRACTION LIGHT TO COME ON, TO FIX THIS PROBLEM HAVE CAR CODE SCAN AND YOU CAN FIND OUT WHAT CAUSING THE ABS AND TRAC LIGHT TO TURN ON.

Traction control and anti-locks(ABS) lights come on there is sensors that are pluged in behind the rotors check and see if they are disconected or loose sometimes when you change your brake pads they might come loose and not making contact.

check for a broken wire to the abs wheel speed sensors. Also, one can replace the sensors sometimes.

have to ask is the relucter for the abs sensor on the axle or rotor

traction control light on

Sounds like they may have left something disconnected like the ABS/ Traction control wheel sensor, make them fix it!!

My friend has just installed new rotors and brake shoes on the rear of my 99 deville. The service stability system light flashes on and off and dings, as it flashes. Also, the traction control light is on at the top of the dash. How do I go about cancelling these anoying lights out on my dash??!! Please, somebody help me.

Eric D.