2001 Jeep Grand Cherokee no windows go down and lock dont work

BROKEN WIRING ON DRIVERS DOOR OR THE MASTER SWITCH FOR POWER WINDOWS AN LOCKS ON DRIVERS DOOR

Had a similar problem... the wiring harness that goes inside the drivers door had a broken wire, hence no power would go to the door locks or the power windows. Check the area where the harness flexes when the door opens and closes.

ck computer

Lock and unlock both run off the same power supply...I'd be looking for a bad switch or a broken wire in the door harness where the wires go through the rubber boot between the door and pillar.

if you open the drivers door and look for the rubber boot near the hinge, pull the boot back and you will find a heavy blown wire with (i think with a red trace) will be broken. join the wire together and solder so it cant pull apart..

There are broken wires in the wiring harness between the frame and your driver's side door. These wires control all the windows and door locks in a 95 Jeep. Same thing happened to me. You will have to cut the rubber boot to get it off and check which wires are broken and repair them.

a brake in ur wires in the door,on a 04 grand i had the same problem,in the wire harness were the junction box is rust had broken one of the male prongs

SOUNDS LIKE BROKEN WIRE IN DOOR JAMB

driver side lock and window switch... if its all one unit... i had a 95 cherokee laredo that did that... changed the switch and it fixed my problem...

The wires that go into the doors has probably broken from opening and closing the doors.They run though a rubber boot where the hinges are. Check all the doors wires. This is a common problem and i have fix many jeeps with these problems.