I believe that the entire dash has to come out but I haven't had to do one of those in a long time.
SOURCE: front grill on toyota solara
That is correct - it worked for me - now the questions is - How do I remove the old logo ?
SOURCE: my car is a 004 toyota solara I took for an oil change and Mr Lub
When driving, the temperator might go up a little and the gear might not change on specified timing.
SOURCE: how to change the charcoal canister on a 2000
Disconnect the tubing.....unfasten and remove....very easy.
SOURCE: How to replace a starter on a toyota solara v6
You take out the battery, and the air-filter housing to give extra working space.
Then push in the starter motor to its place, and hand-tighten all its bolts.
Wrench tighten the starter bolts to the engine 38.ft-lb
Connect the solenoid wire, and tighten to 10.ft-lb
Connect the battery positive cable, and tighten to13.ft-lb.
Replace the air-filter housing.
Replace the battery, and terminals.
Crank-up the car.
SOURCE: 2000 V6 Toyota Solara thermostat replacement
Just replaced one. It is on the driver's side of the engine. Follow the lower hose up. It is clamped to the inlet tube which is held in the thermostat housing by an O-Ring. There are three nuts holding the housing to the engine block. I managed to get mine off without the recommended removal of the aircleaner
343 views
Usually answered in minutes!
×