Need diagram for power steering belt on 94 plymouth voyager

Plymouth Voyager Repair Manual / Service Manual Online ...

? 0:43
https://www.youtube.com/watch?v=2GqbKAZhMcY
Dec 14, 2014 - Uploaded by Tanner Jackson
If you need a Plymouth Voyager repair manual, you're in luck. ...steering, suspension, engine, transmission, air conditioning, heater, or something ... 1994, 1995, 1996, 1997, 1998, 1999, 2000 (90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 00) .... Plymouth VoyagerDodge Caravan 1996 19971998 1999 2000 3.3L ...
images for wiring diagram plymouth voyager

Never brake fluid and nothing else goes in brake master cylinder.

Put power steering fluid or automatic transmission fluid (dextron)

This should help.

See diagram
http://www.fixya.com/uploads/images/C2ED0FB.jpg

The triangular-mounted AC belt must come off first.
At the top pulley is a small bracket and hex screw. This is a jackscrew, which when loosened, will lower the top pulley and the belt will become slack. If jackscrew become detached from pulley, just raise pulley by hand to reconnect, and tighten screw to re-thread.
The larger serpentine belt is loosened by performing a Righty-Tighty to the tensionner pulley. The belt will easily slip off all pulleys. Be sure to follow diagram to install new belts. Remove plastic shield under engine for access to lowest pulleys. I recommend tying up belt above top pulley, threading around everything except tensioner, then untying & position belt over tensionner.

Which engine?
To replace the drive belt or serpentine belt on a Voyager check the engine size. For 2.4L engines, a serpentine belt runs the air conditioning compressor and alternator. For 3.0L models, the alternator and power steering share a belt with a separate belt for the AC. Dodge recommends checking the belts every 15,000 miles or 12 months for possible replacement. I have gone 3 yrs with one.. it will start squealing when you turn on the heater to defrost..

http://www.automd.com/46/how-to-replace-a-serpentine-belt/

Most replacement belts have a diagram on the package. However, the easiest way is to pay close attention to the belt you are taking off, and replace the new one the same way. The pulleys themselves are usually 'grooved' or 'smooth' which tells you whether the front or back of the belt is against it. The hardest part is figuring out how to release tension on the idler-pulley. If you can get the belt on and the idler/tension pulley (same thing) pulls the belt tight, chances are you got the belt right. If you don't know what I mean, then the mostest best way is to get a Clymer Manual and read up. Its really a simple thing to do yourself.

I used a long heavy duty screw driver to release the tension on a Pontiac Sunbird.. the belt will only fit on one way..

Make a drawing of where the belt and pulleys are before you remove the belt. You won't need a diagram,you will have made your own and be done before you ever find one,unless you have a shop manual already.

Sorry for the delay.
I am personally going back to answer your unanswered question. I do not know if you still need the answer, but I am going to answer it in case you still do.
Harmonic Balancer on a '97 Plymouth Voyager?
Click on the following direct Links. The first Link has the Timing Belt Diagrams that you will need. The second Link has the Serpentine and Drive Belt (if applicable) Diagrams you will need.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
For the Timing Belt:
http://www.2carpros.com/car_repair_information/year/1997/make/plymouth/model/voyager/1997_plymouth_voyager_timing_belt_diagram_marks.htm
For the Serpentine and Drive Belts (if applicable):
http://www.2carpros.com/car_repair_information/year/1997/make/plymouth/model/voyager/1997_plymouth_voyager_drive_belt_routing_diagram.htm

where is the oil draing or leaking to or from?

the bolt that the locknut is on may also be tightened up to hold the pump
loosen off that bolt a turn or 2

Are you sure you don't need the serpentine belt diagram or you have a 3.0? Because 3.3's don't have a timing belt. Let me know.