1999 Dodge Ram 1500 not turning over

In a North American website that only speaks English, you choose Spanish! :>D

2000 dodge ram 1500 dash and taillights won't turn on

https://translate.google.ca/?sl=auto&tl=en&text=2000%20dodge%20ram%201500%20el%20tablero%20y%20las%20luces%20traseras%20no%20encienden&op=translate

El Fuso box

Fuse Box Diagram Dodge Ram 1500 / 2500 / 3500 (1994-2001)

https://fuse-box.info > dodge > dodge-ram-1500-2500-...

1998, 1999, 2000, 2001 - Here you will find fuse box diagrams of Dodge Ram Pickup 1500/2500/3500 1994, 1995, 1996, 1997, 1998, 1999, 2000 and 2001, get ...

Try this link to get the details of fixing this:

2008 Dodge Ram 1500 Gauge LED Light Color Change part 1 of 2

running a gauge check:

Running gauge check on 2008 Dodge Ram 1500 Hemi

Well the air bag light would not have anything to do with the engine. The warning light for the gauges would come on if the gauges needed attention. And that would happen if the engine died.
When you turn the key on, does the gas gauge register ?
Do you have spark and fuel pressure when you crank the engine ?

Check the gauge by holding in the trip odometer reset button and turn key to run,hold button for 10 seconds this will iniate a diagnostics on all the gauges,and lights if gauge doesn't move during this test replace gauge,if it does move then check the wires on the plug at the engine coolant temp sensor (ects) you can check the sensor by using a ohms meter by unpplugging it and check ohm's or resistance when cold and then start engine as the engine warms up the ohm's reading should gradually lower as the sensor is a thermister and as it warms up the resistance will drop.

First check is a look in the fuse box for a blown or loose fuse and also push all relays into their sockets. The check engine light shows that a trouble code is registered in the computer. Rent a scanner, read out any code(s), and pursue to repairs.

Have you checked for freon leaks. It sounds like it's low and the pressure switch drops out. Try adding freon.

Removed cluster from dashboard and unplugged & turned the whole cluster clockwise very slowly and needle started moving from 150 mph back down to 0 mph when rotation was completely done. Kept cluster upright while re-installing and plugged back in the plugs on back and everything was fine. Called local Dodge dealer and told me would take 30-45 minutes to reset and would cost approximately $70 to fix. Took about 8-10 minutes of my time and saved myself $70. This may not work for everyone but this was my amazing quick fix thanks to GOD for giving me this thought to try this.

I have the same problem on my 2003 Dodge Ram 2500 5.7 Hemi. Also the gauge is sometimesslow to register after filling. Maybe 5 minutes.My neighbor has the same poblem with his 1999 Durango? I think this is a job for a recall.

the voltage is controled by the ecm you will need a scanner to be able to read the date stream . the odds are that ecm has failed.

Have your battery tested. When the battery has a problem the dodges will act this way.