Need diagram for timing belt setting and alignment on a 2000 isuzu rodeo, 3.2 ltr, v6

https://www.youtube.com/watch?v=rnmQJ8owA24

it's no jeep,. sorry.
Rodeo run 3 or 4 v6 engines.
so what is the displacment and best is to say what country,.
are you in canada?
we are a USA forum., so...??
the fsm book covers this.
as does alldata.com
Isuzu is dead here in uSA, so they cant sell you a book.

in usa its a Gen 2 Rodeo
here are the 32 v6s in gen2

• 3.2 L 6VD1 V6 (gasoline)
• 3.5 L 6VE1W V6 (gasoline)

most common here is the 6vd1 in usa. alldata.com covers ours.
so lets google that.
using real names for engines makes google search HIT.
true for all cars. all engines.
so i type for you, and bingo, hits a many. even a video. hark.

https://www.google.com/webhp?gws_rd=ssl#q=isuzu++6vd1+timing+belt

This procedure is not for the novice. The water pump is driven via the timing belt. It is recommended that the belt be replaced at the same time as the pump. There is serious risk of engine damage (valves/pistons) if you accidentally move the camshaft or crankshaft from proper alignment when removing or replacing the belt/pump, and it is extremely easy to do just that while trying to position the belt. Unless you are very skilled at engine repair, you should leave this one to someone who is skilled at it.

Heres two diagrams for aligning the timing gears for timing belt, this is for a 1999 rodeo with the 3.2 engine, hope this helps,one diagram is for the cams and the other is for the crank gear,

In the US the public library should have an auto repair data base that you can access with your library card number. If not you could always go there and check out a real book.

there should be a dot on either cam shaft and a marking on the belt that line up. http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?chapterTitle=Engine+Mechanical+Components&partName=Engine+Mechanical&pageId=0900c1528002abcd&subChapterTitle=Timing+Belt+Cover%2C+Belt+%26amp%3B+Sprockets&partId=0900c1528002ab6d
hope that helps. one of the easiest cars I've ever timed

Go to parts store get manual that will tell you a lot better then it can be explained

Sorry for the severly delayed response....
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but am answering it in case you do.

Click on the following free, direct Link. It has all the Timing Belt Diagrams for your 1999 Isuzu Rodeo 3.2L DOHC V6 Engine and engine options (AC/No AC, etc.) you will need, complete with Instructional and Directional Diagrams to set your Timing.

Again my apologies...
Let me know if this helped or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1999/make/isuzu/model/rodeo/1999_isuzu_rodeo_timing_belt_diagram_marks.htm

Here is your diagram. Good Luck and say thanks..lol http://www.2carpros.com/car_repair_information/tec_info/2000/isuzu/rodeo/2000_isuzu_rodeo_drive_belt_routing_diagram.htm