Is the alarm after market ? and is so you need to replace it with another after market one .. now if the alarm is factory ?...you will need a remote control from the dealer and they will reprogram it for you
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
yes if you have a good one that is functioning correctly you can refeer to the owners manual under remote keyless entry or alarm section and it will give you a step by step procedure every chrysler jeep dodge has a differant procedure if you cant find it send me a clarification notice and i will look into for you
If it is a factory alarm you can't unhook it. Replace the switch attached to the lock cylinder inside the door. In the meantime, the switch on the passenger door may still be good. Cycle the key in the passenger door to see if it turns off the alarm.
some alarms have kill switches, but most of them prevent the car from even starting. i would consider strongly getting the remote for the alarm or Completely disconnect the alarm module.
in the 1994 jeep the anti theft device can be over riden by using key lock/unluck back hatch open and close, then start engine as usual. each time u lock or disconnect battery u must do it again.
That remote should not be able to be programmed by you, it needs to be programmed by the dealer using their computer. I know that some later and earlier models can be programmed by the user, but I did some research on this as i have a 96 as well and it seems the 96 was a dealer computer thing. If you in fact bought the remote from the dealer they should be willing to program it for FREE. Otherwise I was given a $30 estimate for the programming.
Hi....
To program the RKE (remote keyless entry) on your jeep g cherokee 94.
Follow this steps.
But maybe you will need to do more than one time.
Because some times require a few intents.
but if you have 1 remote programed all ready. you will program up 4 remotes.
If you don't have any one programed and you can't programed with this steps.
You will need to BUY the RECEIVER that is located on the ROOF CONSOLE.
Because some times come damaged....
Ok. I hope this work for your problem.
Thank you for use fixya.
thats what i figured..thank you so much..its a factory alarm ..
×