SOURCE: front end rattle
It's a loose steering column. Remove the black plastic shield under the steering wheel. Lossen the bolt that holds the two shafts together, slide them together as far as they'll go, and re-tighten the bolt. It's that simple... to stop that annoying rattle.
SOURCE: 1997 Acura 1.6EL rattle underneath front end
you could have a loose heat sheald or a broken catilitic converter you should take it to a shop and have it looked at tobe safe
SOURCE: how do you remove a suzuki swift (2007) gear knob?
From memory you need to turn it counter-clockwise to unclick it and then pull off. You then need to cut off the plastic part left on the stick. Bear in mind that once you have done this you cannot put the stock one back on.
I was going to change mine too, but after driving with the stock one on I realised that it is a nicely weighted and comfortable anyway.
SOURCE: Front End Rattle
I am guessing it is still under the factory warranty. Take it to the dealership and have them fix it for free.
973 views
Usually answered in minutes!
×