SOURCE: How do I change Camshaft position sensor
THE CAMSHAFT SENSOR IS IN THE DISTRIBUTOR.
Testimonial: "you was very helpful thank you..."
SOURCE: Camshaft Position Sensor Location
IF U GO TO THE RIGHT SIDE OF THE ENGINE AND LOOK 4 INCHES BEHIND THE BELT IT WILL BE ON TOP OF THE TIMING COVER.THE WIRES WILL BE RED/WHITE,BLACK,BROWN/WHITE
SOURCE: locating and replacing a camshaft sensor in a 2005 dodge neon
this is a very very simple procedure. you do not need pics. there is a sensor located at the end of the engine on the far side from the belts. at the top. it has a plug with two wires in it. just remove the two 10mm bolts un hook the plug and reverse the process to reinstall. if you have a factory intake you may have to remove it to access this sensor. just the intake tube.
SOURCE: Where is the camshaft position sensor located in a 2001 VW Passat
when you are looking at the engine pull off the plastic cover on top then the front cover that covers you timing belt there is a wire harness tha goes right to it in the left upper coner two ten mil bolts and it comes off careful not to drop bolts down in belt that could be bad. it is that easy
SOURCE: a bad camshaft position sensor for a 2.4L 2005 dodge stratus
THE CAMSHAFT POSITION SENSOR IS LOCATED ON THE LEFT SIDE OF THE HEAD. 2 BOLTS AND AN OVAL FLANGE. IT HAS A RED LOCK ON THE PLUG WHICH YOU JUST MOVE TO THE RIGHT TO RELEASE THE MAIN PLUG. BUT I dont know if thats your problem. the timing belt seems to fail on these cars prematurely. Dodge recomends 90,000 miles but many cars bend engine valves before this due to the timing belt. (around 83000-88000) miles. I would reccomend having someone look into this problem first. Also trying this yourself can be costly, simply because the timing belt MUST be installed properly and exactly. If this is not done the engine could be at risk causing expensive repairs. Ihave a friend who had the timing belt replaced by an individual and the i recieved it on a tow truck. Which it now cost them 1600.00 to repair. I have been a mechanic for 15 years. But i got smart and went back to college and npw i am a refrigeration technition. Just trying to help you out. any ? [email protected] i would be glad to help.
204 views
Usually answered in minutes!
×