Problem with 2006 toyota corolla
SOURCE: Removing the 100 amp fuse link in a 1994 toyota corolla
the fuse link is bolted in from the two side in the fusebox.you have to un bolt the whole fusebox so you can raise it and if you look at the sides there are two side panels that can be moved down so you can get a socket or spanner on the two bolts apprx 10mm. undo them and raise the fuse out and put the new one in and tighten up the bolts again. hope this helps.
SOURCE: how do you replace the 100 amp alternator fuse in
it pulls out and the new one simply pushes in. they are just like a wall plug in your home
SOURCE: how to remove a broken battery fuse 100 amp from
On the sides of the fuse box, two bolts are holding the fuse down in place. I believe you need a 10mm socket to remove the bolts. Then, the fuse should slide right out.
SOURCE: 2006 toyota corolla eel body
On the left side of the dash is a small access door for the fuse panel. Look for fuse labeled CIG, it is a 15A fuse.
2,678 views
Usually answered in minutes!
×