2005 Cadillac STS Logo
terry moreau Posted on Sep 09, 2012
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I changed my battery in my 2005 cadillac sts, and now it is showing that the starter is locked. fob locks and unlocks the car, but i can't get car to start. what do i do?

How do i get the fob to let me start the car?

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

New Friend:

An expert that has 1 follower.

  • Expert 79 Answers
  • Posted on Sep 09, 2012
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

New Friend:

An expert that has 1 follower.

Joined: Sep 05, 2012
Answers
79
Questions
1
Helped
24871
Points
268

You can try this, with the battery connected lock the car using the key fob, make sure no keys are in the ignition. Disconnect the battery again and let it sit for 30 min or so, reconnect the battery and using the key fob unlock the car, it should start, if not repeat the procedure and insert the key into the door lock to unlock the car, both of these solutions should reset the security system. Good luck.

3 Related Answers

Anonymous

  • 16 Answers
  • Posted on May 09, 2009

SOURCE: 2005 cadillac sts auto lock

the problem is in main brain dodge vans have the same problems. you need a tech to read code on glitch

Ad

Anonymous

  • 64 Answers
  • Posted on Nov 05, 2010

SOURCE: How do I program my

that is a dealer item there-that is serious,call them for advise 1st-they should help you w/ no charge
thats an sts we're talkin about

Anonymous

  • 2 Answers
  • Posted on May 19, 2011

SOURCE: The buttons on my keys

I had the same problem....replace the fob battery.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
3answers

2006 Cadillac STS driver side door lock doesn't activate when I approach the car (as it's supposed to). Key fob also doesn't activate the lock or unlock features. All other doors and trunk operate...

It actually sounds like the micro switch in the drivers door that reads the key fob is bad, if the key works and the fob works on the other doors and the trunk. You will most likely need to have the door handle replaced, they're not very expensive by themselves but it can be a lot of work. Cadillac CTS Door Handle Repair Micro Switches Replacement 2nd Gen The video is a 2008 cts but will give you a good idea of whats wrong and whats required to fix it
1helpful
1answer

How do i get the anti theft devise to let me start my 2005 cadillac sts after changing battery

accsess fault memories and erase trouble codes , u need a code reader for that
0helpful
1answer

I changed battery in remote keypad and now i can't get into the car. Already tried hold the lock and unlock on the keypad down for 15 seconds and still didn't work.

Remote Key FOB Information
Transmitter Programming
1. Close all the vehicle doors.
2. Insert the ignition key into the ignition lock cylinder.
3. Press and hold the door unlock switch.
4. While holding the door lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF.
5. Release the door unlock switch. The doors will lock and unlock to confirm the program mode.
6. Press and hold the LOCK button and the UNLOCK button simultaneously on one transmitter. After a delay of approximately 15 seconds, the doors will lock and unlock to confirm the programming of that transmitter.
7. Repeat the previous step to program up to 4 transmitters.
8. Turn the ignition switch to the RUN position in order to exit the keyless entry transmitter programming mode.
9. Operate the transmitter functions in order to verify correct system operation.
If this does not work, you may need to have the dealer do it with a scan tool. Make sure you take all the remotes you want to use with the car if you have to go this route.
1helpful
1answer

My 2005 Cadillac STS has a completely dead battery. Nothing lights up when I pull on the door handle. I just moved and I have no clue where my key is since I've only used the FOB since I've owned...

Raise the car up,support it in the front

Put a battery charger on the battery cable
at the starter and the ground to the sub frame

Charge the battery for a couple hours,then try to
open the door with key fob
0helpful
1answer

2005 sts wont start. Says no FOBS detected. Please help?

Are both FOBs doing this? If it's only one I would replace the FOB battery.
NO FOBS DETECTED Message on DIC, No Crank/Start Unless Fob in Center Console Pocket or Remote Keyless Entry (RKE) Button Inoperative (Replace Remote Control Door Lock, Theft Deterrent Receiver Assm) #04-08-52-008

Tell the Dealership to look at this. They should be able to fix it quickly.

Keep us updated.
2helpful
1answer

How do I program my key fob for a 2005 cadillac sts?? It unlocks the doors but it will not start the car or when I lock the car it doesent sound the horn

that is a dealer item there-that is serious,call them for advise 1st-they should help you w/ no charge
thats an sts we're talkin about
7helpful
5answers

My 2006 cadillac sts key fob all of a sudden is not working it says no fob detected and i have the fob what can b wrong??

My cadilliac sts 2005 key fob started no working. when I try to start it the car tells me that the key fob is not detected. I just changed the battery and it is still doing it. What else could be wrong with it:
0helpful
1answer

My fob does not open my doors can not even get in my car it takes 15 min of constant pulling of door handels to get in

Two things to check:

Replace the fob batteries or reprogram. Here's how to reprogram them:

Connect a scan tool.
Select diagnostics.
Select body code.
Select body style code.
Select other.
Select remote function actuator (RFA).
Select special functions.
Select F0 program key fobs.
Choose the fob number that you wish to program.
Follow the screen prompts in order to complete the programming procedure.
Press and hold the lock and the unlock buttons on the transmitter being programmed. The door locks will cycle. This should take about 15 seconds.
Proceed to the next transmitter and repeat steps 1-11 until all of the transmitters are complete.
Exit the remote keyless entry (RKE) programming.
Disconnect the scan tool.
Cycle the ignition. Test the transmitters for proper operation.
27helpful
3answers

NO FOB DETECTED

Slight glitch from what I've found. Has happened to me at the gas pump. One other time while talking outside my car with out opening the doors. If No FOB detected then step out of the car lock and unlock, get back in and try. If still dosen't detect then you need to walk twenty feet away with your key and it should reset.
Not finding what you are looking for?

1,320 views

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...