2009 toyota venza has red blinking light that looks like a lock and only flashes when car is off

SOURCE: How do I turn off tire pressure sensor warnning

set the tire pressure to the door decal, check all the tires, including the spare.

SOURCE: I want to install Toyota OEM remote starter to my 2009 Venza.

Do not install the OEM starter - it only works from about 80 feet away and is quite problematic. I just purchased a new V6-AWD with the push button start and the dealer is taking the OEM start out as we speak and taking it for an after market starter.

If you decide to do it yourself (you'll need to be quite mechanically inclined for this install), check youtube as the poster above has suggested - but again I highly suggest you consider an aftermarket starter and save the money that I didn't.

SOURCE: 2009 TOYOTA VENZA MAINTENANCE REQUIRED LIGHT

I finally found the solution. It is actually detailed in the owner's manual but you really have to hunt for it. Look at page 450/451.

Step 1: Switch the display to the trip meter A with the engine running.

Step 2: Turn the engine off (but don't turn the key all the way to where you can remove it from the ignition).

Step 3: While pressing the trip meter reset button, turn the key to IGNITION ON (but don't start the engine). Continue to press and hold the trip meter reset button until the trip meter displays "000000".

SOURCE: does the 2009 Toyota Venza have a timing belt or

It has a chain, 1 that goes around the VVT on each side then a main chain that goes to the crank sprocket

SOURCE: The multi information display prewired for a

yes, but if installed it only works in reverse. When remove from reverse it goes back to display