Open the hood, remove any panels covering the light, and unhook the wiring harness. The light is generally held in place with four screws or bolts. Remove them, but mark the allignment. The light pretty much just screws out.
_______________________
Audi-VW Airbag Reseter
SOURCE: How do I replace the headlight in my 2005 mitsubishi lancer
Hi. While looking into your question I came across another posting of the same question for a 2004 Mitsubishi Endeavor and I believe it could help you. I put it in a link below. The instruction are basically the same. I hope this helps. Let me know if I can be of anymore assistance.
2004 Mitsubishi Endeavor Headlight Replacement
SOURCE: How to Change the Headlights in a 2008 Lancer ES
You shouldn't have to remove the entire headlight assembly to change the bulbs; They should either twist out, snap out, or have a spring clip that holds the bulbs in.
SOURCE: How to remove the headlight off an 06 lancer es 4 dr?
yes remove the front bumper and u will see the obvious bolts and brackets to remove the assemblies, just a few bolts that hold them in place.
SOURCE: I can't enter the radio code in my 2005 Lancer
On your radio your preset stations each have a number 1,2,3,4,5,etc. The first preset station represents the first number in your code. Lets say your code is 1212(example) then you would: [press #1 preset-1 time.] [press #2 preset-2 times.] [press #3 preset-2 times.] [press #4 preset-1 time.]
Once you've entered your code press the cd button.
Good Luck.
SOURCE: how to change rear brakes on a 2005 mitsubishi
jack up and block up rear end for saftey pull tires off,pull 2 bolts off calaber slide calaber off,take a Cclamp to depress cylinder put new brakes in. then put the calaber back on and then tighten your bolts and then put your tires back on ext.
580 views
Usually answered in minutes!
×