2006 Kia Amanti Logo
A
Anonymous Posted on Mar 18, 2012

My rpm gauge doesn't work on the 2006 Kia amanti and the check engine light is staying on

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on May 26, 2013
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: May 26, 2013
Answers
1
Questions
0
Helped
1977
Points
1

I have a 2006 kia amanti and engine light was on code said crank shaft sensor So I changed it put all together now code comes up P0320....Ignition/Distributor Engine Speed Input Circuit ?? rpm gauge don't work anymore

5 Related Answers

Anonymous

  • 106 Answers
  • Posted on Jun 13, 2008

SOURCE: Engine Check Light - 2006 KIA Optima

Hi

Before you turn out the light you should have a code read carried out just to make sure nothing sinister is going on with the management system.

If the car is running ok then the code will probably either pertian to the O2 sensor, the EVAP system, or a drop in catalytic efficiency, but this isn't set in stone, just the most popular scenarios.

Very best regards

Geordie

Ad

Anonymous

  • 496 Answers
  • Posted on Jan 22, 2009

SOURCE: Check Engine light

that code definition is "Evap high purge flow fault". It means you may have a problem with the evaporative system. this system routes fuel fumes back to the fuel tank. If you want to try and clear this code, find the radio code for your car and then disconnect the battery for 30 seconds. Reconnect the battery and the check engine light should be out. You will then need the radio code to reset your car stereo. the check engine light may stay off if the condition was a transient one. If not, the light will come back on after you drive the car two drive cycles. That is: two starts, warm ups and shut downs. If the light returns, have a mechanic check it out.

Anonymous

  • 81 Answers
  • Posted on Aug 28, 2009

SOURCE: 2006 Kia Sedona's check engine light

try not to fill up the tank while the car is running. maybe there is a bad seal on the gas cap now. i would simply reccomend taking it to the nearest advanced auto part, autozone, jiffy lube...anything of that matter and get them to read the code for you[they should do it for free]. Make sure to write it down, come back here and let me know what it said. its probably not a big deal

Anonymous

  • 1 Answer
  • Posted on Jan 04, 2010

SOURCE: I own a 04 Kia Amanti and the six cylinder is

I have a 2004 Kia Amanti, the air bag light is on and has been on for some time now.I have taken it to Kia; they put it on the computer and could not determine why it came on. They reset it and no sooner I got home it came back on. Now, my check engine light came on 2 days ago, it does not accelerate properly and if I push the accelerator to the floor the car starts jumping. Thank goodness I was still near my home, when this happened, I went back home and have not driven since. What could be the cause of these issues?

Anonymous

  • 1 Answer
  • Posted on May 02, 2010

SOURCE: engine light on rpm gage not working

cylinder 1 misfire change spark plugs i just had that problem. you can still drive it it wont hurt the engine.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My kia amanti 2006 with 3.5 cc engine shows code p1155, p1110, p1171 and rpm wont rev up 3000 and it shakes at 3000 but normal down 3000 rpm

Some fixya user told me a website reliable-store it is very good.. I used it to repair my shredder it had some spark issue which wasn't easi ly fixed. you can go there and try
0helpful
1answer

Where is the accelerator trottle pedal sensor located on 2006 kia amanti

You mean TPS sensor( RPM)where the black hose goes to the engine.From air filter.
0helpful
1answer

How many catalytic converters on a 2006 Kia Amanti ?

If you have a v 6 - engine it should have two at the exhaust manifold and one down stream .in some cases the up stream converter will brake up and cause the down stream converter to clog up.if your state has emissions laws you will have to replace them. In S.C. we can bypass the up stream . but you might have a check engine light
0helpful
2answers

2006 Kia Amanti... the brake lights stay on

If the brake lights stay on even if the car is turned off (or even if it is on) the first thing I would be checking is the brake pedal switch under the dash. Brake lights are activated when the brake pedal is depressed and comes off the switch or the return spring is broken or stretched not allowing it to fully return when foot is taken off the brake pedal.
1helpful
1answer

The check engine light came on and the RPM needle

If depends on the milage of the car, some lights come on after 100,000 miles just to remind you that maintanace is require but is good idea to run the car thru a scanner to be sure.
1helpful
2answers

2004 Kia Amanti

check the master switch, and the relay under the hood in the engine compartement fuse box... still nothing let me know.
Not finding what you are looking for?

1,987 views

Ask a Question

Usually answered in minutes!

Top Kia Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...