Sliding door wiring diagram
I had to cut the retracting wire for opening the door as it got jammed could not close door without chime going all of the time . I removed the fuse which solved the noise problem except now my radio and clock will not work . I know the chime goes through the speakers . How can I disconnect the wire from the door and put the fuse back in the get my radio and clock working . I do not plan to replace the retraction wire for the automatic door
If your vehicle has
the dual power sliding doors, both doors will have
to be reset. To reset a door, do the following:
1. Check to be sure the power sliding door is
unlocked and securely closed.
2. Turn the ignition to LOCK.
3. If the power sliding door overhead console
switch is in the override (deactivation)
position, return to the activation position.
4. Open the sliding door using the remote
keyless entry transmitter, overhead console
switch, or passenger switch. Allow the door to
travel fully open.
If the door does not travel to the fully open
position, press the overhead console switch to the
override (deactivation) position and slide the
door fully open and closed. Check for foreign
objects in the tracks. Repeat the procedure starting
with Step 1. If the door resists travel to the fully
open position, see your retailer for service.
701 views
Usually answered in minutes!
×