Peugeot 307 service reset procedure

All Volvo cars use the same procedure:

Instructions

1. • 1 Turn the ignition switch to "ON" without starting the engine.
     
   • 2 Press the trip odometer button to change the display to the total mileage.
     
   • 3 Turn the ignition switch to "OFF."
     
   • 4 Press and hold the trip odometer button. Turn the ignition switch to "ON."
     
   • 5 Release the trip odometer button when the oil change maintenance light resets.
     

if it has a digital odo/ press trip knob until odo is displayed/ press and hold , turn ignition , hold for 4 secounds , release and press again, number 10 will be displayed, keep pressing until 20 comes up, press until odo reading is displayed again, turn ignition off , turn on again , notice the t belt lamp turn off in appros 5 secounds / if not able to reset try this again

1. Make sure the trip odometer is NOT on 'Trip A' or 'Trip B' (ie: just the normal ODO). With the ignition off, press and hold the reset button. Press the 'Start' button twice without pressing the brake, but while holding the reset button. The dash will let you know its resetting, just keep holding the button until it is done.

2. Make sure the Trip/Odometer is set to "trip A". With ignition off press and hold the reset button. While pressing the reset button, press the start/ignition button twice to turn ignition on. Keep watching the trip/odometer display to flash the lines (-----) until you see it flash the zeros (00000) then it

This is how you do it make sure the trip has the odometer showing, not the Trip A or B. 
Reset the system by the following procedure: 
1. Turn the ignition key to the “LOCK” position with the 
odometer reading shown. 
2. Turn the ignition key to the “ON” position while holding down the “ODO/TRIP” button. Hold down the button for at least 5 seconds. The odometer indicates “000000” and the light goes off. If the system fails to reset, the light will continue flashing. 

I have used this in every RX330 i have ever done. will not work if trip a or b is showing though