20 Most Recent 2006 Land Rover Range Rover Sport Questions & Answers

question edited for clarity and toss in some CAPS. Question moved to model category.

Camshaft Position Sensor Location

Range Rovers Forum https://www.rangerovers.net > threads > camshaft-posit... Nov 5, 2021 - It's right under the VVT solenoid on the upper timing cover. 2 per cylinder head, 4 per car. Part LR014372, however a Bremi 31491073 is the same ... Which is bank one? - Range Rovers Forum Jun 14, 2016 Can the Cranck Position Sensor be installed DIY ? What to do May 27, 2015 Not Starting, but cranking - Range Rovers Forum Oct 22, 2016 Crankshaft sensor ' Range Rovers Forum Apr 13, 2007 More results from www.rangerovers.net

see the photo attached. God bless you

when the battery terminals are removed this tends to corrupt the CPU program . Use a scanner to reset the CPU program and the problem should be solved.

ur gay

Passenger door has a cover if removed it exposes the manual key insert to open the door with the ignition key

Can you feel some hard jerking passing on bumpy road? Have the suspension checked.

If I read right you just want to raise the air suspension and solenoid valves jumper the air compressor and it will fill the airbags

It's either the brake rotor that is warped, or the tires are getting out of round and are not rolling evenly when the brakes are applied. Good luck on this repair.

The brake light fuse lives in the boot on a Range Rover Sport - lift the access panel and its on the Left side in a bank of 4-5 fuses immediately neighbouring the jack slot.

hey guys really need major help...2006 range rover sport hse radio audio keeps on coming on and off..ive checked and tested fuse and still no luck ...what did i miss ? is there something else i need to look?

Hello u'd need a proper manual for this in my opinion like there are plenty of dealers and online shops that deal in those.. you can get some free at re liable-store and it;s actually really illustrative

if your LR3/Range Rover Harmon Kardon Goes into Phone Mode Switch off ignition wait until the harmon kardon switches off totally . Remove the pull off trim around the unit , it pulls away from the bottom , then remove the torQ screws to take the audio unit out . remove the fibre optic mos cable plug (Fibres are orange .) Switch on your ignition. audio will come on . wait 30 secs , then reinsert your fibre cable plug , the audio unit might revert to phone mode , Dont worry , Just switch off and repeat the process, Trust me it will come on . this default code happens when the Power supply has been disconnected , and the unit is looking for a phone, by taking the fiber optic loop out the unit searches, then goes to the next mode audio . DO NOT BUY A NEW UNIT

Where is immobilizer location on td5

Hi, I would certainly say this is a fuse problem you should have checked these first, hope this helps. Please leave me feed back: Malcolm Campbell, Thanks.

Check for breaker fuse under hood.

Hi, They are connected look at fuse's this may be the problem. Please leave me feedback, Malcolm Campbell.