20 Most Recent
1990 Jeep Wagoneer Limited Questions & Answers
How do I adjust the
They should be hydraulic, meaning that they are self-adjusting. If they are making noise you probably have one or more faulty lifters.
2/6/2011 3:54:43 PM •
1990 Jeep...
•
Answered
on Feb 06, 2011
There is oil coming through
Check if the pcv system is operating , Ck the pcv valve, the engine may have too much "blow by" which means its worn out.
12/4/2010 12:41:05 PM •
1990 Jeep...
•
Answered
on Dec 04, 2010
Ok yes i do know this but when i looked under the
pull them one at a time and see if any are blown.sometimes they dont have a fuse they have curcuit breaker instead.you cant tell if they are blown or not unless you have a tester.it mightbe a blownn window motor.
11/20/2010 2:55:49 AM •
1990 Jeep...
•
Answered
on Nov 20, 2010
What do i set the
HI, There is no valve lash spec for your Jeep they are non adjustable. You will just tighten the rocker arms down to 21ft. lbs. I usually do them in two steps 15ft lbs first then come back and finish at 21ft. lbs. This just gives the lifters a chance to collapse slower. Good luck and happy motoring.
9/13/2010 5:48:22 AM •
1990 Jeep...
•
Answered
on Sep 13, 2010
Is their any one else out their that can tell me
I've had my 1990 Wagoneer since 2007, it was an old "City Park Vehicle" so it was kept in good condition until I bought it. I ran the poor thing practically into the ground and it still runs great!
3/18/2010 1:08:05 PM •
1990 Jeep...
•
Answered
on Mar 18, 2010
Battery on my 1990 jeep wagoner is being drained
TRY DISCONECTING THE DAY TIME RUNNING LIGHT MODULE AN LET IT SIT AND SEE IF THE BATTERY IS DRAINED AGAIN. IT IS ON TOP OF THE RIGHT FENDER WELL AND HAS TWO CONECTORS.
WARRNING IT MAY DISABLE YOUR HEAD LAMPS
DO NOT DRIVE WITH IT DISCONECTED.
REPLACE THE DRL MODULE IF THE BATTERY HOLDS THE CHARGE.
1/25/2010 9:47:37 PM •
1990 Jeep...
•
Answered
on Jan 25, 2010
Not finding what you are looking for?