20 Most Recent 1988 Mitsubishi Cordia Questions & Answers

give these websites a try www.alldatadiy.com and www.autozone.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car wish you the best of luck Michigan Man.

need to be top overhaull

There is a valve in the top of the Valve cover with a hose that runs to your air filter. PVC valve....... It tends to get clogged. Check/Replace

Are you a DIYer? if so you need a repair manual. Your favorite auto parts store should carry one. You will want one next time anyway. OR try filepeep.com if they have it, or manualslib.com

Hi there:Haynes Publishing was founded in 1960 and now has offices in the UK, USA and Australia.Try looking in THIS LINK.Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.Thank you for using FixYa, have a nice day.

repair mannual book or ask your NAPA dealer to print it off for you. Good luck
Let me know how it go's i run the dirt track's in arkansas and oklahoma.

SOUNDS LIKE A SHORT SOMEWHERE IN THE WIRING TO THE HORN!

You can download the 4G37 (1.8L) ENGINE section of the factory service manual HERE It has the full timing belt procedure

you should use that computer that came with the engine ,but why a wiring diagram it should plug right in, the engine should of come with the wiring harness and computer should plug in,

stick or auto?

you might want to try to prime the fuel filter. Open the bleeder - 10mm- and press the pump. See if you have air in the line.

Connect a scan tool and the DTC code will tell you the issue.. https://www.google.com/search?q=4m40+engine+neutral+light+blinks+continuously ..

Check the clutch disengaging properly ...............

Some things to check:

• CV axles (a telltale sign of bad or wearing axles is noise)
• Suspension bushings (sway bar bushings, etc)
• Motor mounts (including transmission mounts)
• Control arms/ball joints (some aftermarkets fail out of the box)
• Strut mounts (worn or faulty strut mounts can cause noise)
• Proper torque spec for all suspension components

under left side of dash