2007 Buick Rendezvous CXL SUV - Answered Questions & Fixed issues
2007 Rendezvous CXL.
1) Driving at
Sounds like 1 or more of your ground straps from the engine block to the frame either are disconnected or are loose.. I would check there 1st, especially if the engine has been removed and replaced.
7/13/2017 4:28:56 AM •
2007 Buick...
•
Answered
on Jul 13, 2017
•
154 views
Battery light comes on
check belt and idler pulley it can become week and under load may let belt slip
7/27/2015 4:29:58 AM •
2007 Buick...
•
Answered
on Jul 27, 2015
•
865 views
Crankshaft sensor
Unhook connector, remove bolt, wiggle it off, then reverse order to reinstall new one. You need a Tech 2 to relearn/reprogram crank sensor. Most garage mechanics will have one.
12/10/2014 6:53:43 PM •
2007 Buick...
•
Answered
on Dec 10, 2014
•
153 views
Flashing lights
I solved my problem by reflashing the computer. You have to go to the Buick dealership and tell them about the issue and they should know how to reprogram the computer. This is not free, so you will have to pay for it.
12/10/2014 6:40:10 PM •
2007 Buick...
•
Answered
on Dec 10, 2014
•
105 views
Lights flashing
Take this to a qualified electrical troubleshooter. It could be anything from a bad connector or bad AC compressor or body control module. I suspect there could be a loose ground wire that the AC control module and the body control module share in common.
4/12/2014 6:13:33 PM •
2007 Buick...
•
Answered
on Apr 12, 2014
•
249 views
Engine skipping on a buick Rendezvous
When the check engine light is on, the computer has found a problem that can affect fuel economy or emissions.When the light flashes the problem is serious.You need to get the computer scanned for trouble codes to proceed with testing.
2/22/2013 7:31:19 PM •
2007 Buick...
•
Answered
on Feb 22, 2013
•
412 views
Not finding what you are looking for?