20 Most Recent
2010 Honda Civic Questions & Answers
What is a b13 code?
B - Replace engine oil and oil filter.
1 - Rotate tires, and check tire pressure and condition
3 - Replace transmission fluid and transfer fluid (if equipped).
Here is a description of what each individual Maintenance code means for your vehicle. (Please remember that more than one code may be displayed at a time)
A - Replace just engine oil and Filter
B - Replace engine oil and oil filter. Also inspect Brake system and components and perform a tire rotation.
1 - Rotate tires, and check tire pressure and condition
2 - Replace air cleaner element, check drive belt, and replace dust and pollen filter.
3 - Replace transmission fluid and transfer fluid (if equipped).
4 - Replace spark plugs, replace timing belt (if equipped), inspect water pump, and inspect/ adjust valve clearance.
5 - Replace engine coolant
6 - Replace rear differential fluid (if equipped).
Why both front lights went off
Off the top of my head I can think of the fuse for the headlights. Also check the relay for the headlights. Also it would be unusual but could be both bulbs went out.
What do I look for when I have stop lamps but no taillights?
they are different circuits.
the tails are really park lights
after all the front parks are not the tail nor are side lamps tail
but they are all on the park circuit.
the first thing to do is look at all park lamps
the ones that are dead, are bad bulbs ( or bad wiring to same)
if all are Dead, (are they)
the the fuse blew.
marked TAIL. (from tin lizzy days. that name, but is park)
How do i off the spanner light
do tell where that might be.
span,
where is this span.. inside car or outside, do tell exact location
or snap a photo and post it ( not one post ever did but there is always hope)
Not finding what you are looking for?