I now have a windows 8 how can I get it to work?
Have a look at the original instructions to see which operating system the software will work with. It should also tell you on the installation disc. If it doesn't mention Windows 8 you might have a problem. You can also visit the Microsoft website to see if your version will work with Windows 8. Or go to the help screen on windows and type "software won't run in windows 8".
You can also visit the software makers website to see if they have a solution.
LP recorder incompatibility
The software (LP recorder) does not recognise your soundcard. Download a different free program to record your LPs.
Hotwire does not open
What kind of 'recovery' did you do ?If you did a 'factory recovery', then you will likely have to re-install the Hotwire software before it will recognize the device.
Need a pass word to download cd
Hi Harry:You directed this question at me, but unfortunately this isn't my expertise and I am unable to
provide you with a real solution at this time.
Hopefully one of other experts will be able to
provide you with a real solution.
Thank you for using FixYa.
I have an Xitel Hi-Fi
The product details say that is a plug and play device, this means it shouldn't need a driver, how ever with it being used with windows 7, I don't know if that makes the difference. Shouldn't, but never no, I also had no luck finding drivers. I would uninstall the drivers associated with it and reboot your computer with this hooked up and see what happens.
6/10/2011 10:36:13 PM •
Xitel Pro...
•
947 views • 0 helpful votes
I plug in my Inport
Hello.
There may be a conflict with your sound card.
From Xitel:
1. Go to START -> CONTROL PANEL -> SOUNDS AND MULTIMEDIA
PROPERTIES -> AUDIO TAB
2. Make sure that in the Audio tab your soundcard appears as
the Preferred Playback device with USB Audio or
INport as the Preferred Recording Device. There
should also be a check next to the option 'use only preferred device'.
3. When you start LPRecorder you should also make sure that
Recording Device is set to USB Device or INport
and Playback Device is set as your soundcard and
that there is a check next to the option Simultaneous
Playback.
Hope this helps.
[email protected] can't find my software
There are 3 programs that were delivered with this unit: a ripper, a recorder and a processor.
They can be downloaded from their original sites:
ripper - http://www.cfbsoftware.com/lpripper/lpripper.aspx
recorder -
http://www.cfbsoftware.com/lprecorder/lprecorder.aspx
processor - http://www.wavecor.co.uk/wavedl.html
You will need the serials that are needed to activate them - they were printed on the sleeve of software disk and at the back of the user manual.
Lost my xitel inport registration
To find the registration and code key numbers for software on your computer, go to www.download.com and download "Belarc Advisor" it is FREE. It will scan your system and bring up a report screen showing all your hardware and software, including software license numbers and code keys. It will also tell you which MS patches and fixes are installed or missing.
Not finding what you are looking for?