Williams-Sonoma Recent Questions, Troubleshooting Help & Support

The small, approximately 1/4" long spring goes on the very bottom on the grinding shaft, on the outside, just before you put the nut on. There is a small gap between the inside of the nut and outside of the shaft that the spring fits into (hard to see, but it's there). Add the spring, then the nut and screw it on carefully by hand (so that you don't strip the threads). You can then adjust the grind by turning the nut. The farther you tighten the nut the finer the grind will be.

https://creativehomemaking.com/download/Williams-Sonoma_WS-1094Manual.pdf This is for your model, WS 1094

The machine has started the "decalcification" process.When the three lights are flashing just press the three buttons at the same time (with three fingers) and relase when you hear a beep. After that your all good.This happens when you press the three buttons at the same time when cleaning for example.Hope it helps!

Here you go. Exact same device, only with a different name. You can download the manual from here: Maverick ET 84 Instruction Manual

you can go online and type the name of the item and put instructions for .