Sony Ericsson P - Popular Questions, Answers, Tips & Manuals - Page 2
Sonyericsson p1i network sollution
First Option:Phone in the Other Sim and check the Phone Network Signal If Network Signal Problem not Solved SoSecend Option:Your Phone Network IC Fault So Please change Network ICAnd Network Signal Problem will Solvedif it is there isn't much you can do on this side of the network.Contact your phone company.
I forgot the lock code
ur defalt phones codes is 12345 or 00000 u can use it Default 4 Digit user code: 1234 or 0000Default 6 Digit Security code: 123456 or 000000Type *#06# at the mobile screen to know IMEI no of your mobile.send the IMEI no to me and i will reply you with unlocking code.IF Problem not Solved SoPlease New Software install in the Phone Problem will SolvedIf For puk & pin cod problem So PleaseVery Best Solution:You Go To Service & Sim Office and Get The Puk code And Pin code From Office opratorEnter The Puk code and YesEnter The pin code and YesSo Puk code Open and Problem will Quickly Solved
How can i send message?
for sending text messages :1.go to your message settings and check the message center number to see if it is correct2. call to your network operator customer care3. request the message center number...4.note it down5. go to message settings>message center number6. insert the number which is noted by you and save itthis solves your messaging problem ...Good luck
PIi CHARGING SOLUSIONS
First Option:mostly nokia chargers doesn't make problems...just try the following..connect ur mobile with a system (usb cable)...found out whether it is charging or not...if the same prblm appears then there is a prblm in ur cell phone or power jack(socket)...if it charged with usb cable buy a new chargerPlease change Phone Bettery and check the chargingIF Charging Problem not Solved SoSecond Option:Your Phone charging IC Fault So Please change charging ICAnd charging Problem will Solved Quickly
Unlock the code how?
You need to Unlock from network lock.Get the Unlock code from the site
Mobile-unlocker.com and Unlock it.You need to remove security code means you can try default code ..Get from service provider.
I want to get reset
default code this type of phone is 0000 or try 1234,be sure to back up necessary data of yours because this will erase everything after the process.
If it so happen that this code does not work,better bring the phone to any mobile service shop near you for reading the codes using a gsmgadget.
Touch screen not functioning
Dear user if your problem is that your mobile's touch screen is not functioning properly then don't worry please put your mobile in sun light for 15minutes and your mobile's touch screen will be working again properly........try it
My sony ericsson P1i cannot
No need to format. Install PC suite for P1i on your PC & upgrade the software through Internet. It will replace the old operating system.
sonsunny
How to unlock phone of sonyericsson P1i
There are two ways to unlock your phone.
1.) If you don't have time or mobile service shop is far away from your location,You can unlock your phone thru paid service,just go on this link and specify the following :
GO HERE* manufacturer
* model
* country
* network provider
after encoder the information, click "Get the Available Service".just follow the procedure on how to get the code and the terms of payment.
2.) Possible to unlock your phone by going to any mobile service shop near you,this is recommendable if you ask me because it is fast and affordable.
Thank you for visiting FixYa
My p990i flip keyboard 123
Flip keyboard consist of flex connector inside and this could be damage due to fliptop mechanism that usually in used.malfunction of its key may result by cutting or breaking the flex connector and this is not repairable,possible to replace the flex connector and only service center can fix this problem.
My phone wont boot after
You probable have the wrong software installed on your phone. please reload the right software for the phone.
Touch screen not working
It could be a connection problem. Try this steps:
1) Turn off your Ericsson, then turn over the unit. Slide down the battery door and pull it off the unit. Lift the battery out of its compartment and set it aside.
2) Run your fingernail along the seam where back cover meets the body of the unit to pop it out of place. Remove the back cover and set it aside.
3) Remove the two screws from the top corners of the back of the phone.
4) Turn your phone right-side up and run your fingernail along the seam where the front cover meets the body of the phone. Pop the cover out of place and set it aside.
5) Lift the keypad, located just below the screen, up from its side and place it to the side of the unit.
6) Remove the two screws on the metal plate just underneath where the keypad used to sit. Remove the metal plate and set it aside. The orange screen cable will now be visible just below the screen, connected to a port on the green circuit board.
7) Unplug the screen cable and plug it back in, making sure it is secure in the port. This should fix the connection problem with the screen. Reverse the steps for reassembly.
Hangs when opening a program
slt j'ai un Sony ericsson P1i qui est déprogrammé j'aimerais le reprogrammer, aider moi s'il vous plait c'est mon petit chouchou adoré merci.
je suis au 0022505718375
HI!
forget my master reset code
Default is 0000. If you have further problems, you can do a factory reset. WARNING: This will format the device, wiping all data off. This will cause you to lose everything on the device. To do a Factory reset:
Jog Dial UP
*
Jog Dial DOWN
Jog Dial DOWN
*
Jog Dial DOWN
*
Explanation: With the phone on, move the side/jog dial upwards once ,
then press *, move jog dial down twice and press * again, move jog dial
downwards and press *
You will then see "Service Menus" and can choose either "Service Information" "Service Tests" or "Format Internal Disk"
Not finding what you are looking for?