Polaroid POGO - Recent Questions, Troubleshooting & Support - Page 5
I purchased a new mobile
I do not have the LG touch mobile, but experienced a similar problem with another device. It didn't work at al: I selected a photo, say print and sent it via bluetooth to the POGO, it didn't connect.
The solution that worked was: Not give a PRINT-command! Just SEND your picture to the POGO by bluetooth, and it will start printing.
I have re set the
The print date option is the date the photgraph was taken, not the date it was printed.
Polaroid PoGo Digital Photo photographs streaky with purple edge
TO CLEAN PRINT HEAD, TAKE AN A4 SHEET OF PAPER CUT IT TO SIZE FOR THE POGO,BUT MAKE IT (3) THREE THIKNESSES THIK, FEED IT IN UNDER THE PRINT HEAD AND CLOSE LID, WHILE THE PAPER IS BEING EJECTED PUSH UP ON THE PAPER THAT IS BEING EJECTED WITH YOUR FINGERS, YOU MAY NEED TO DO THIS A NUMBER OF TIMES, BUT IT WILL CLEAR THE STREAKING. IT WORKED FOR ME AND MY POGO DOSE BRILLIANT PRINTS.HOPE THIS HELPS PEOPLE. JB
Print from nokia E63 through WIFI
Try connecting your printer directly to the wifi router/switch in a shared network configuration. Then go to your router settings, find the local ip address add this as the 'host'. Your settings should be as follows:
Driver : HP Mobile Printing
Bearer: Socket/HP Jetdirect
Access
Piont: My Home Wifi (kaba)
Host : ip address of you
printer
user : Blank ( tried my windows username,no
use)
port : 9100
Printer Model: Officejet Printers
You will have to reconfigure your drivers on your pc as well. Mine installed as a wireless shared printer even though the printer is not wireless but I have it connected to my wifi switch for sharing and it worked fine.
Good luck
Damien_1977
Pairing code to bluetooth
the bluettooth code are 1 of the two defaults unless you changed it. Its in the manual but for your quick reference here are the defaults, 1 of the below will work
- 0000
- 1234
- 0
One of those will work, If not consult your manual for a default code or if you changed it consult your manual to reset it.
I keep trying to connect to tha bluetooth but its
Check your camera manual and it should have a code listed for a bluetooth password (or check the printer which might have it's own password). If that does not work then the bluetooth version might be incompatible with your camera/printer.
3/14/2011 3:41:30 AM •
Polaroid...
•
Answered
on Mar 14, 2011
I have a t mobile
Hello there!
1. Go into your phone settings and under "Bluetooth" find an option that says "Find Me" and turn on the option for as many minutes as you can.
2. On the other device go into the settings and under "Bluetooth" find an option that says "Search/Scan" or something similar.
3. The second device will scan for your phone and when it finds it, connect to it.
4. It'll ask you for a passcode, it is 0000 by default
5. Enter 0000 on both devices and now they should connect to each other.
If my solution didn't work, before rating my answer, please comment back and I will suggest more ways to troubleshoot and solve your problem. Thanks and good luck!
Where can I find a
I finally found charger for my Polaroid Pogo printer at 1-800-765-2764 listen to options. They may also be able to help with the charger for Pogo Camera also. Let us know if you succeed!
Kathyevcm
Not finding what you are looking for?