Panasonic kx-T7633 with Pbx-DAT50 goes dead
- By unplugging and then replugging the power cable, try performing an easy reboot of the phone.
- Make that the phone is securely attached to a power source and that the power supply is operating as anticipated.
- Ensure that the cables linking the phone and the PBX-DAT50 system are firmly connected on both ends. If there are any damaged or incorrectly attached cables, it can result in problems with connectivity.
8/12/2023 6:49:20 PM •
Panasonic...
•
Answered
on Aug 12, 2023
Buenas tengon un tv Panasonic plasma th-42px80u y no tengo pesente los 187 y 130 voltios de la placa fuente. Donde pudiera ser el problema?
If you're not getting the expected voltages (187V and 130V) from the source board of your Panasonic TH-42PX80U plasma TV, there could be several potential reasons for this issue. Here are some steps you can take to troubleshoot the problem:
- Check Power Outlet and Cable: Ensure that the power outlet you're using is functional and providing the correct voltage. Also, make sure the power cable connecting your TV to the outlet is in good condition and properly plugged in.
- Inspect the Source Board: The source board is responsible for providing power to various components of the TV. Inspect the board for any visible signs of damage, such as burnt components, bulging capacitors, or loose connections.
- Check Fuses: The source board might have fuses that protect against voltage irregularities. Check if any of these fuses have blown, and if they have, replace them with fuses of the same type and rating.
- Voltage Regulator Components: The source board contains components like voltage regulators that regulate the voltage to different parts of the TV. If a voltage regulator has failed, it could result in the incorrect voltage output. Check for any damaged or overheated voltage regulator components.
- Power Supply Unit (PSU): The power supply unit is a common culprit for voltage-related issues. It's responsible for converting incoming power to the various voltages needed by the TV's components. If the PSU is faulty, it could lead to voltage problems. Consider inspecting or replacing the power supply unit.
- Test Components: If you have the necessary skills and equipment, you can test individual components on the source board using a multimeter. This can help identify faulty components that might be causing the voltage issues.
- Consult a Professional: If you're not comfortable performing these tasks yourself, or if you're unable to diagnose and fix the issue, it's recommended to consult a professional TV repair technician. They have the expertise and tools needed to diagnose and repair complex electronic issues.
Remember, working with electronics can be dangerous, especially if you're not familiar with the proper safety procedures. If you're unsure about any step, it's best to seek professional assistance to avoid personal injury or further damage to your TV.
8/11/2023 11:06:48 PM •
Panasonic...
•
Answered
on Aug 11, 2023
Panasonic KX-T7433 CO Not Assigned Error
The "CO Not Assigned" error on your Panasonic KX-T7433 handset indicates that the Central Office (CO) line has not been properly assigned to the handset. Since you've mentioned that other handsets in your office can connect to CO-01 without any issues, the problem seems to be specific to certain handsets. Here are a few steps you can take to troubleshoot and potentially resolve this issue:
- Restart the Handset: Sometimes, a simple restart can resolve temporary glitches. Try unplugging the handset's power cord for a few seconds and then plugging it back in.
- Check CO Assignment: Double-check the CO assignment settings on the problematic handsets. Make sure that the CO-01 line is correctly assigned to those handsets. Follow these steps:
- Press the "Program" button on the handset.
- Dial 1 (CO Line Access).
- Dial the line number you want to assign (in your case, 01).
- Press the "Auto Dial/Store" button to save the assignment.
- Hang up the handset.
- Reset the Handset: If reassignment doesn't work, you can try resetting the handset to its default settings. Keep in mind that this will erase any customized settings on the handset. To perform a reset:
- Make sure the handset is not in use.
- Press and hold the "Program" button while you reconnect the power cord.
- Keep holding the "Program" button until the handset displays "Initializing..." and then release the button.
- The handset will restart and return to its default settings. You'll need to reconfigure any personalized settings afterward.
- Firmware Update: Check if there are any firmware updates available for the Panasonic KX-T7433 system. Outdated firmware can sometimes cause compatibility issues. Refer to the user manual or Panasonic's official website for instructions on updating the firmware.
- Contact Panasonic Support: If none of the above steps resolve the issue, it might be best to contact Panasonic's customer support. They can provide specific guidance based on your model and system setup.
- Physical Check: Ensure that the physical connections and cables related to the CO-01 line are secure and functioning properly. A loose connection could lead to communication problems.
Keep in mind that these steps are general suggestions and may need to be adjusted based on the specific model of your phone system and any unique configurations in your office. If you're not comfortable performing these steps yourself, it's recommended to seek assistance from a professional technician or the manufacturer's support team.
Will not turn on, no blinking lights, power coming from cord is good
Sounds like the power supply board is dead. Probably has a blown power line fuse on the board. A power surge will sometimes blow the fuse and protect the board from damage. Replacing the fuse will restore the TV if this is the case. Most times though, the supply has a blown part that causes the fuse to blow and your only option then is to replace the board.
8/6/2023 8:07:04 PM •
Panasonic...
•
Answered
on Aug 06, 2023
SA AK27 panasonic system?
If you use a 3.5mm jack to whatever the type of sockets on your set are called Aux in. Probably Phono or RCA sockets.
Set your Panasonic to AUX, volume at about 1/4, play your laptop with the lead connected from your output socket on the laptop. Adjusy the volume to suit your requirements.
Panasonic Palmcorder model VJAW0032. No audio during playback. Has anyone had similar problems?
Having camera issues is always a pain, Here are a few trouble shooting ideas to see if it can solve the issue.
try cleaning the playback head: If the audio issue persists with all recordings, it's possible that the playback head may be dirty. Over time, dust and debris can accumulate on the head, affecting the audio quality. Try using a head cleaning tape to clean the playback head following the manufacturer's instructions.
Check the audio output connections: Ensure that the audio output connections (e.g., headphone jack, AV output) are secure and properly connected. If you are using external speakers or headphones, try them with other devices to ensure they are functioning correctly.
Test with different playback devices: Try playing back the recorded video on a different device like a computer or another video player. This will help you determine if the audio issue is specific to the Palmcorder or if the video file itself is corrupted.
Update firmware or software: Check the Panasonic website for any firmware updates or software patches that might address audio playback issues. Follow the instructions provided by the manufacturer for updating your Palmcorder.
Lastly Reset to factory settings: If none of the above steps resolve the problem, consider performing a factory reset on the Palmcorder. This will reset all settings to their default values, and it might help if the issue is caused by a software misconfiguration.
Panasonic DP-C266 does not print one color
If your Panasonic DP-C266 copier is not printing yellow and you have already attempted some troubleshooting steps, here are a few additional suggestions to consider:
- Verify Toner Cartridge: Confirm that the yellow toner cartridge is installed correctly. Ensure it is securely inserted into the copier and that any protective seals or tabs have been removed from the cartridge.
- Check Toner Levels: Check the toner levels of the yellow cartridge. If the toner is low or depleted, replace the cartridge with a new one. Even if the toner appears to be full, it's possible that the cartridge may be defective or experiencing a blockage.
- Clean Developer Unit: The developer unit may have accumulated debris or become contaminated, leading to poor toner transfer. Open the front cover and locate the developer unit. Carefully remove it and clean it according to the manufacturer's instructions. Use a soft, lint-free cloth to remove any toner or debris. Avoid touching the developer roller with bare hands.
- Check Drum Unit: The drum unit may be damaged or worn, resulting in the poor transfer of yellow toner. Inspect the drum unit for any signs of damage, scratches, or wear. If necessary, replace the drum unit with a new one.
- Perform Color Calibration: Use the copier's built-in color calibration feature to ensure accurate color reproduction. Refer to the user manual for instructions on how to access and perform color calibration. This process can help correct any color imbalances.
- Service or Professional Help: If the issue persists after trying the above steps, it may require professional assistance. Contact Panasonic customer support or schedule a service visit by a qualified technician. They have the specialized tools and knowledge to diagnose and address specific issues with your copier model.
When contacting customer support or a technician, provide them with detailed information about the problem, including the steps you have already taken for troubleshooting. This will help them in providing more accurate assistance and guidance tailored to your specific situation.
How do I unlock the VCR on my Panasonic combo please?
Not sure what you mean by 'unlock my VCR'. Video Cassette Recorders don't have a lock.https://www.google.com/search?q=unlock+the+VCR+on+my+Panasonic+comboGooglemake model manualAll questions on Fixya need 'make model (what it is)' as first 3 words.
7/7/2023 7:03:07 PM •
Panasonic...
•
Answered
on Jul 07, 2023
Why does my Panasonic KX-TGM420 go straight to voice mail?
Voicemail is a service of your telephone company. If your calls are going to voicemail, check the settings following the directions for the service. If the answering system is getting the calls, then check if the KX-TGM420 handset(s) and base are set to a ringer volume of 0. You can change this from either the base or a handset by pressing the + button while the phone is ringing. Otherwise, when the phone system is in standby (no calls in or out), press # 1 6 0 on a handset or * # 1 6 0 on the base. Then set the ringer volume on the handset (0-6) or base (0-10). This is the equivalent of pressing menu and navigating through the menu (Menu > Settings > Ringer Adjustment > Ringer Volume (Incoming)). You can also turn off the ringer by pressing and holding 0 on the handset and Ringer Off on the base. See pages 33 and 44 of the manual, link below.
I hope this helps. The manual is available here: https://help.panasonic.ca/viewing/ALL/KX-TGM420/OI/TGM420_PNQX7794YA/TGM420_PNQX7794YA.pdf .
Cindy Wells
Not finding what you are looking for?