Nordic Track Watches - Recent Questions, Troubleshooting & Support
Nordictrack Audiorider R400 Exercise Bike. Where do I plug in the power adapter please?
Question edited for a lot more clarity.
Question moved from 'Power Computers' to a better category.
The manual is dreadfully vague
Note: The Console (4) can be operated with an optional power supply instead of batteries. To purchase a power supply, call the toll-free telephone number on the front cover of this manual.
Plug one end of the power supply into the jack at the front of the exercise cycle. Plug the other end of the power supply into an appropriate outlet that is properly installed in accordance with all local codes and ordinances.
Look on both sides of the console and also at the front of the bike itself. I have to say though, if the console didn't work with batteries, it is unlikely to work with a power supply. It is broken and that is why it didn't work with batteries.
What you could do is follow the wiring harness as shown in the parts manual from the console down and where it branches off to..
Aha, I found this
Exercise Equipment Technician:
treadmilltech
It should plug in at the bottom of the front where the 2 side shields come together or it will go into the console itself in the back.
https://www.sportsmith.net/images/product_support%5CNordicTrack%5C216731%20-%20NORDICTRACK%20AUDIORIDER%20R400%20EXERCISE%20BIKE%5CNTEX4196.1-247436.pdf
https://www.google.com/search?q=nordictrack+audiorider+r400+mains+adapter+operation
..
Sector adv 1000 manual
ZERO-SETTING OF THE SECONDS-HAND & SUB-SECOND HAND ON THE SECTOR ADV1000 CHRONOGRAPH.
NOTE: The pusher buttons A, B & C are positioned on the watch at the 2 o'clock (A), 10 o'clock (B) & 8 o'clock positions (C), while the crown is at the 4 o'clock position.
1) Set the crown at the normal (in) position.
2) Push the B button twice.
3) Pull out the crown to the 2nd position (fully out).
a.) Seconds-hand setting: a push of button A moves the 2nd hand by 1 second. Move it until it is at the zero position.
b.) 2/100ths second hand: a push of button B moves the 2/100ths second hand by one 2/100ths second. A continuous push moves it quickly. Move it until it is at the zero position.
4) Push the crown back in to normal position.
QUICK-SET OF THE CALENDAR DATE
With the alarm switch off, pull out the crown halfway to the first "out" position (not fully out). Turn the crown clockwise to quick-set the date.
4/25/2024 5:30:35 PM •
Watches
•
Answered
12 hours ago
My pearl necklace has broken
Contact a local jeweler and see if they do restringing. Most will charge approx $10 per inch.
Thank you for contacting FixYa.
Jewel
4/7/2024 2:26:15 AM •
Watches
•
Answered
on Apr 07, 2024
How do I set time.? No manual, remote does not work.
- Buttons on the Device: Look for any buttons on the device itself. Sometimes, there are buttons that allow you to navigate through menus and adjust settings directly on the device.
- Trial and Error: Try pressing different buttons on the device to see if any of them bring up a menu for setting the time. Look for buttons labeled "Menu," "Setup," "Clock," or similar.
- Long Press: Sometimes, pressing and holding certain buttons on the device can activate different functions. Try pressing and holding various buttons to see if it triggers a menu for setting the time.
- Google Search: If you know the model number of your Ultech device, try searching online for the manual. Many manuals are available for download from manufacturer websites or other online sources.
- Contact Manufacturer: If you're unable to find the manual online or if you're still having trouble setting the time, try reaching out to Ultech's customer support. They may be able to provide you with guidance on how to set the time on your device.
- Replace Remote Batteries: If the remote isn't working, try replacing the batteries. Sometimes, a non-functional remote can be as simple as dead batteries.
2/28/2024 9:57:13 AM •
Watches
•
Answered
on Feb 28, 2024
Not finding what you are looking for?