New World Ovens - Recent Questions, Troubleshooting & Support

slot online

I would assume it would be the one in the middle as it's easiest to read. There is probably a mark there but too small to see. Use the food you cook regularly as a guide. Under cooked, over cooked? Adjust as you need.

If an oven turns on but won't stay on it could be due to a faulty thermal fuse that trips if the oven overheats. If this is blown the oven won't turn on at all. One of the relays on the relay control might be faulty as well, in that case a new board is required. A faulty main control board is a common cause as well. Bake and Broil Elements: These main elements can burn out over time. They can crack and get holes. Best to inspect them for damage. Igniter: Igniters are the number one cause of an oven not turning on. Igniters open the safety valve and heat up to ignite the gas in the burner assembly. It can be tested with a multimeter for continuity and replaced if necessary. I got this info from https://www.electrafixbc.ca/appliances/stove.html.

It seems to me that your grill is old already. You need to buy a new grill that will not have problems. You can buy a grill at Embeya.com

For the NW09DO, press the outer two buttons ("-" and "+") together and hold for three or four seconds. Then press "+" to advance the clock/time and "-" to go back.

When the correct time is showing, leave the buttons alone for four or five seconds.

No it sounds like the relay on the clock is faulty

https://www.espares.co.uk/advice/careandmaintenance/how-to-fit-universal-oven-door-seals

STOVES n600 is a squair glass window which prizes our from the bottom. It looks simetrical but only goes back in one way up

check your power input or theirs a fault in the making of clock renotify the company again

Faulty element is likely cause or could be a dud thermostat.

you can order one at marcone.com with your model number

try the company or ebay or google with exact part number as google has manufacturers databases of parts number try it once wait five mins try again the same search some servers need too wake up ...

Oven shut-down thermal fuse. Did it happen after a self-clean cycle?