NCR 7872
Amigo, estoy buscando lo mismo que tu y quisiera saber si ya lo encontraste mi correo es
[email protected]
2/26/2013 2:52:14 PM •
NCR 7872
•
Answered
on Feb 26, 2013
Programming scale to display in pounds
ITS YOUR SCALE BOARD! <-- I am also an NCR Technician (Now Sales and Technician)
Capital Computer Group
2425 Enterprise Dr.
#200
Mendota Heights MN, 55120
[email protected]
651-405-8293
We Buy, Sell, Repair, and Refurbish both new and used POS Systems, NCR,
IBM... We also offer structured cabling as well as Video Surveillance
Equipment.
Give us a call and we can trouble shoot it with you!
8/4/2012 8:25:33 AM •
NCR 7875
•
Answered
on Aug 04, 2012
NCR 7875 Scanner/Scale Communication problem with PC
You need another cable (the metrologic cable doesnt work with the same configuration) and set the button in the interface card to rs-232 and program the scanner-scale with the programing tags.
6/16/2012 2:57:39 PM •
NCR 7875
•
Answered
on Jun 16, 2012
My NCR 6676 is closing
I know this is an old post but, this may help other people searching. Try clearing fitness/status list. If running Aptra Advance software, from Select Menu, choose option 7 then clear Fitness. If Edge software, choose option 4 diagnostics, then option 1 technician diagnostics. On diagnostics menu choose Device status list then select Clear All or select error according to number on list and clear. Put back in service and test.
NCR 2114-1306 manuel
Follow this link for NCR support:http://www.ncr.com/home/search?q=manuals&location=full+siteOn that page are two numbers to call for direct support:Inside the US: 1-800-225-5627Outside US: 1-937-445-1936Good luck!
I need a user manual
Although I don't have a manual for you, I do have extensive knowledge about this POS system. You may email me directly if you wish.
[email protected] Is this a system you are currently using or did you perhaps purchase it from ebay or an auction and would like to get it running?
DRIVERS FOR THERMICAL PRINTER 7197
I have ncr thermal printer 7197, and i have to use windows XP .this printer is not running in my system with his driver.plese you solve my problem
I need to change an NCR 7875 - 2000 from lbs to kg
Firstly you will need NCR Scan Tags. You can download from
http://ncrpr.ncr.com/web/rsdmkt/dealerReady/docs/User_Guides/HighPer_Scanner-User-Guide.pdf
You will have to print out the Scan Tags which start at page 281 and you will also need the correct weights; 0kg, 2.5kg, 5kg and 10kg.
Then follow these steps and be sure to scan tags in correct order:
1. Reset
2. Default
3. Program mode
4. Hex 3
5. Hex 0
6. Hex 1
7. Push the calibrate button under weighing tray
8. Place the correct weights in order. It will ask for the weights in order.
9. Calibration complete
2/24/2011 12:05:02 AM •
NCR 7875
•
Answered
on Feb 24, 2011
Not finding what you are looking for?