How do I change from degree C to degree F?
If you are talking about the formula...degrees Celsius times 9/5 and add 32 degrees
If you are talking about your GPS system...need the manufacturer and model number.
Semper Fi,
Z
2/20/2018 10:18:22 PM •
Navigator GPS
•
Answered
on Feb 20, 2018
•
48 views
I am getting code c 1979 on ford navigator
Code C1979 Is for the Integrated Wheel End (IWE) solenoid circuit failure.
This means the 4X4 system is either not engaging or disengaging. Can be caused by anything from vacuum leaks to solenoid failure, poor connections, Mode switch, etc., Most likely solenoid failure.
Code p0750 for a2001 ford expedition Eddie Bauer
Found this online:
Possible causes
- Low transmission fluid level
- Dirty transmission fluid
- Faulty shift solenoid 1 valve
- Shift solenoid 1 valve harness or connectors
- Shift solenoid 1 valve circuit is open or shorted
Failed "shift solenoids" in older tansmissions is not an uncommon problem. Shift solenoids can often be accessed after removing the transmsission oil pan, so the transmnission may not have to be removed from the vehicle.
If the transmission fillter and fluid have not been replaced on schedule, consider having that done first to see if the problem goes away.
Po735 code
The O.D.. means the Over drive mode... so its normally a faulty wiring ... have a car electrician check out the problem... its not a big deal
Not finding what you are looking for?