Morphy Richards Kitchen Appliances - Others - Answered Questions & Fixed Issues
I have a morphy Richards 732007 super vac and the hand held device keeps beeping and flashes green lights when start button is pressed
The beeping and flashing green lights on your Morphy Richards 732007 Super Vac handheld device could indicate a specific error or issue with the device. Here are a few troubleshooting steps you can try:
- Check the battery: Ensure that the handheld device is fully charged. If the battery is low, it might cause the beeping and flashing lights. Charge the device according to the manufacturer's instructions and try again.
- Clean the filters: Clogged filters can impact the device's performance. Remove and clean the filters according to the user manual's instructions. Make sure they are completely dry before reattaching them.
- Check for blockages: Inspect the nozzle and suction pathways for any blockages or obstructions. Clear away any debris that might be interfering with the device's operation.
- Reset the device: Sometimes, a simple reset can resolve minor issues. Turn off the device, remove the battery (if removable), wait for a few minutes, then reinsert the battery and turn it back on.
MR Breadmaker 48268 - trips the house fuse part
I have same problem. MR breadmaker tests as OK for earth leakage, but blows circuit breaker when begins the heating cycle. Electrician advises that dust and/or moisture can make internal switches work poorly which leads to tripping of modern circuit breakers. He suggested taking it to service centre for a clean and test, but wasn't hopeful that this woudl cure the problem. Costs more to get things fixed than replace them nowadays!
My morphy richards accents kettle
Get a new one. This is a result of electronic component failure or a tripping of the varistor that controls how hot the kettle gets. It is failing as a prevention for fire. This is a built in safety and should not be bypassed.
Kettle keeps turning off before it is boiled
Sounds like the thermostat has gone out of calibration. If you're handy with appliance repair it might be possible to purchase (internet) and replace that part - they're usually not adjustable. Otherwise it's a new kettle.
Not finding what you are looking for?