Mi T M Electrical Supplies - Popular Questions, Answers, Tips & Manuals
It starts with the switch fine but when i let go
Check for faulty low oil sending unit or oil level low or dirty oil (some generators have a fuel cut-out solenoid at the carb ). Key switch will override the low oil safety. Easy test, remove wire from oil sending unit. If unit runs, and oil has not been changed in a while, service engine and retest.
What could cause all electrical outlets and lights on the same circuit to go out without tripping the breaker?
GFCI and overcurrent protection (breaker) work in different ways. Suffice to say the GFCI is ~2000x more sensitive and trips long before the typical household breaker. So it's normal for a GFCI trip and the panel breaker to remain closed.The electrician is correct regarding GFCI devices. One GFCI device can protect multiple downstream outlets but some homeowners want a separate reset per floor or each bathroom to have its own reset, etc.As for the hair dryer... you're trying to eliminate trip sources so just leave it unplugged between uses and you'll get your answer.Typical trip sources are the GFCI itself (defect/damage/age) or an appliance of sorts. Then there's rodent or water infiltration issues. Anything you plug into the GFCI circuit is a potential trip source even something seemingly innocuous as a nightlight or air freshener, USB charger, anything that fits into the plug.
11/4/2023 8:20:48 PM •
Electrical...
•
47 views • 0 helpful votes
Not finding what you are looking for?