The radar (jrc 2343) failed
hi
You have lost your magnatron. The HighVoltage connection or the magnatron has gone bad. You have to disconnect the power to the unit. First disassemble housing and remove the rotor or disconnect the power to the rotor motor. Check for a burn on the insulation of high voltage wiring. This could be the clicking noise. In this case use high voltage gloves and repair the connection or replace the magnatron assembly. Please be careful of HIGH voltage. Note; hd sig miss could be decoded stating High Defined Signal Missing.
regards
Problems locking on satellites
Hi,
Well u need to check the manual for settings of your GPS.Else u should call their customer care number they willl tell u the way te set ur GPS as each model has differnt settings.
Thanks!
Sandy
5/13/2009 3:10:20 AM •
JRC GPS
•
Answered
on May 13, 2009
Draw down is to high
found my fault not i the power cable in, but the interconnect to radar dome..approx 50mm from radar screen a break in the wire, found it just by wiggling the cable.. the set wont power up if the interconnect not connected or is faulty
Jrc ff30
Wiring diagram for JRC ff30 sounder, transducer.
Not finding what you are looking for?