Hummingbird Popular Questions, Answers, Tips & Manuals

Do you have a side imaging transducer? If so, mounting to the inside of a fiberglass hull will not work. The transducer mounting needs to be as flat (pointed downward) as much as possible and use the slow curing epoxy that would come with the unit. If you cannot find the problem, contact the manufacturer for support.

https://www.humminbird.com/support/manuals

hi find link for manual https://www.humminbird.com/support/manuals

the solenoid valves come in 24vac and 24vdc (rare) what you have I don't know, same with the controller, why not contact , Hummingbird. did you lose the power pack is that it? tell what is missing, tell when it last worked right, or what is the story.

I would leave 12 inches between but do not put the speed sensor near the prop wash.

As much as possible and still work. zYour unit has GPS? ... that is what you use for speed readings..NOT a paddle wheel>>??

got to settings, and under display and brightness settings make sure it is at either full brightness or a level where your screen is not as dark. If it is very dark so that you cannot see, you may need to do the operation in a dark room or at night under your bed.

Contact Hummingbird in Eufaula, Ala. #800-633-1468. Good luck.

looking on the wrong site fixya site has nothing to do with hummingbird

You do not need any color.

sounds like you replaced the black cartridge, do you run the "align print head" on the printer. Sounds like the black is not aligned to the printer input.

https://www.humminbird.com/WorkArea/DownloadAsset.aspx?id=2962

https://www.humminbird.com/freshwater/home

Hi, The ratio is 1 part sugar to 4 parts water

Battery too low Fuse blown Corroded connections at battery, fuse, connector Dead fish finder

Hello Djelliott19, It's executive file with some instruction. "exceed.exe" is a method of delivery for virus/malware infection. so please beware. You should perform these basic steps.1. Clean history2. fix registry3. uninstalled every unknown programsif you still stuck, recommend to call me at +1 (844) 355-5111 (toll-free) number.ThanksJohn

Try Here,, Serial number question

It is a wood bee.

https://www.manualslib.com/

check for corroded antenna wires and connections