General Garden - Recent Questions, Troubleshooting & Support

See
http://www.macoantennas.net/files/tip_sheets.pdf

Likely they're different. Typically the equipment manufacturer will have a cable adapter to the specific engine mfg. Else you'll need to create your own or patch together connections.

Check this site for a manual https://searchmanuals.net/search7/?keyword=%2Bowners+%2Bmanuals&gclid=CjwKCAiAqt7jBRAcEiwAof2uKwzE1jBmBNKl9hqWd4TyeToXsj80tGOrdxRc3s6LGEWtoEA-xsOXLBoCIhQQAvD_BwE

I hope you have a soil pH tester. You can do two things. Either mix the pH down to a level just below where you want to be or you can get a soil sample and see how much it takes to get the pH down to the desired amount.

YOU MAY HAVE A SWITCH ON THIS UNIT . CAN YOU TAKE THE UNIT A PART AND TAKE ONE OF THE WIRES OFF THE SWITCH AND SEE IF THE UNIT WILL STOP

I have a EX200-3 it starts but has no power. when I use any function it wants to stall. Except for the bucket function, when i use this function the engine frees up. I brought it to a mechinic but they couldnt find the problem and even made the problem worse. So when I start it up the engine sounds like there is a heavy load on it and ready to stall, this problem began and has become worse to the point I can not use the machine. Help please....

I am looking for one as well - did you find one?

remove head and replace packings also inspect o'rings around brass and plungers for damage

Make sure the gas cap is clean and vented