Fuji Phaser - Popular Questions, Answers, Tips & Manuals
WIC COUNTER DOWNLOAD FREE
WIC or waits ink counter is used on a ink jet printer. I can't find a resetter for a Laser printer. Sorry.
4/26/2014 8:09:04 PM •
Fuji Xerox...
•
251 views • 0 helpful votes
Canon LBP 5200 Notifies to replace cartridge even if it is new.
The cartridge has a chip on it to let the printer know if it is new or how much is used. If the printer cannot read the chip it may not work properly.
Make sure all packaging is removed from the cartridge and the chips contact points. Reinstall and see if the problem still exists.
If it does return the cartridge to the store as defective and have them replace it with a new one.
If you are using a remanufactured cartridge or one that has been refilled most likely they did not replace or reset the cartridge chip.
12/1/2013 11:16:03 AM •
Fuji Xerox...
•
147 views • 0 helpful votes
Software reset xerox printer phase 3155
reset xerox 3155 :
1. Connect the printer to the computer and turn it on
2. Wait until the printer is ready for work
3. Run the file "download.bat"
4. The reprogramming process starts automatically
5. Wait until the printer reprograms (1 minute) and restarts
6. After that the reprogramming process is finished, restart the printer
9/21/2012 4:07:16 AM •
Fuji Xerox...
•
1,653 views • 13 helpful votes
Wher do I go to
The driver page is
here. Choose your operating system and language, download it and install. Enoy
8/24/2011 3:11:48 AM •
Fuji Xerox...
•
216 views • 0 helpful votes
How do I reset the Admin password?
The default ID and password are "11111" and "x-admin" respectively. When accessing the administrator menus on the copier the code
11111 is used. I couldn't find a way to reset specifically.
I believe you should be able to access the Admin Menu by pressing the System button on the operator panel. A password is required to enter Admin Menu when Panel Lock Set is set to Enable. To Disable the Panel Lock you will need a password. The factory default panel password is 0000. Hopefully you haven't changed that. This procedure is described in the manual on pages 315 ff. I believe from there you can go in and assign a new Admin password if required.
http://www.fujixeroxprinters.com.hk/downloads/uploaded/CM215_UserGuide_Sec_c3b3.pdf
7/25/2014 11:30:52 PM •
Fuji Xerox®...
•
3,929 views • 0 helpful votes
Not finding what you are looking for?