Digi-Tech Recent Questions, Troubleshooting Help & Support

To the guy with the vocalist live 3. You need to change the FS (footswitch) setting under setup. It toggles between a true switch and working only when you hold it down.

I'm not sure what happened to yours, but my girlfriends cat puked a big hairball on mine, and there was dried liquid on the outside and around the edges of the top metal plate. I decided to take it apart and see if it needed internal cleaning, but I wasn't sure where to start removing screws. I assumed that the silver hex socket bolts on the top metal plate would allow me to lift the plate, but that was wrong. What it did instead was to allow all of the buttons to start falling out of their holes, and then, it can't be removed due to four bolts under the foot pedals. Instead, remove the four (4) screws on the back, and the twelve (12) black screws on the bottom, and the top and bottom parts of the unit will come apart. [The side panels can only be removed by removing the side pedal, and then the silver hex socket bolts along that side, but you should never really need to do this. I'm stating this only as a fact because I partially broke one of mine]. In my case, there was only a small amount of liquid that had penetrated to the interior. Once I was inside the unit, I was able to remove a PCB and reinstall the buttons in their respective holes. It wasn't easy, and I had to use cellophane tape to hold to Phantom Power and Stereo/Mono buttons in place, but I got it done.

U.S and Canada: 20 VAC, 60 Hz Adapter: PS093B-20 Japan: 00 VAC, 50/60 Hz Adapter: PS093B-00 Europe: 230 VAC, 50 Hz Adapter: PS093B-230 UK: 240 VAC, 50 Hz Adapter: PS093B-240 Power adapter requirement straight from the user manual. I am sure you are aware that a simple plug adapter in a tourist shop does nothing to convert 120v US to 240v AUS. Note you unit does not like temperatures above 40C. And you can get that in Australia. Bear in mind the timezone difference if you try Digitech support in the US. DIGITECH VOCALIST LIVE 4 Owner Manual Page 36

Press the power button repeatedly as you turn it on to set the snooze mode, or change back to perpetually on.

Most likely it is the power supply, but if you have a unit that uses the same voltage, you may want to try it. Another possibility would be the power input jack or where it is soldered to the board. If you're not comfortable working on those elements and the PS doesn't work out, take it to the shop.

I've had this before on an old vehicle and had to have the immobiliser unlocked by an auto electrician because the ECU locked it out. Don't know if it was true or not but it took five mins and cost fifty pounds

Hi, You slide one each side of the hard drive to can keep a space from the side of the case.

U ll need to replace the micro switch .