Bushnell Optics - Page 3 - Recent Questions, Troubleshooting & Support

Another one ? Popular request today. Please see response to previous query.

All of Bushnell's manuals are on this web site:

http://www.opticsplanet.net/bushnell-warranty.html

Contact Bushnell to request assistance. Unknown if battery replacement after drying it out will be of use. List of locations and contact information: https://www.bushnellgolf.com/contact/

Have you checked the power supply and the media card ?

Are they supposed to be waterproof? If so, return them.

Can you check that the new battery is an alkaline battery? If it is, and you are still getting the E31 error code, you will need to return your rangefinder to Bushnell to have it reprogrammed. E31 is a programming error code. Most of the time this comes from using non-alkaline batteries or from letting a battery die in the unit. Non-alkaline batteries just don't generate enough current for the laser to operate properly.

https://www.manualslib.com/manual/1268411/Bushnell-Tour-V4.html?page=13

They do stay on for a while after switch, that is OK. Dim and out of focus may indicate that the output voltage is low. If replacing the battery does not fix it, then the problem may be in the power supply circuit.

AWL Golf aims to help people find the best and ultimate resource for people interested in buying a new AWL Golf, which not only match your requirements but also provide you with the best choice within your budget. https://awlgolf.com/

I have a Bushnell Tour V2 that has worked very well for over 8 years and it just started doing the same thing with the frozen screen and 1888 yards. Since I just replaced the battery that I bought at a Pro Shop about 6 months ago I thought the battery was fine. I looked at the battery and did not recognize the brand so I went out and bought a new Copper Top Duracell and BANG it is working again just like new.

UNIT OF MEASURE OPTIONS The YARDAGE PRO TOUR can be used to measure distances in yards or meters. The unit of measure indicators are located in the upper right portion of the LCD. To select between yards and meters, look through the monocular, depress the "mode" button (left side of the unit underneath the BUSHNELL YARDAGE PRO logo) and hold it down for approximately 2 seconds. If you are changing from yards to meters, a change in unit of measure will be indicated by the illumination of the letter M for METER indicator while the YD for YARD indicator is turned off. If you are changing from meters to yards, the opposite will occur. Note: The YARDAGE PRO TOUR will return to the last setting used, each time the unit is turned on.

Presumably the serial number of the item

'Number Unobtainable' - is this Area Code 615 ?

Take it to a repair facility - 'No user-serviceable parts inside' !

This information will be in the manual - or else look at the old one.

Take it to Royal St. Andrews, try again. Or ask Lee.

this is your owners manual https://www.manualslib.com/manual/1452768/Bushnell-Tour-V3.html

Contact Bushnell for help. https://bushnellgolf.com/support/ Support https://bushnellgolf.com/contact/ Contact

Go to the website below and use the appropriate contact details and send them an e-mail with your question. https://www.bushnellgolf.com/contact/

Only Bushnell can answer this - contact them and enquire. There will almost certainly be a charge for this.