Blakeslee Food Mixers - Answered Questions & Fixed Issues
Beater is stuck
I had this happen on my Kitchen Aid mixer. There is probably a build up of dough/cake mix etc inside the hole where the beater fits into. Fill a mixing bowl or a jug deep enough to fit over beater with very hot or boiling water. Immerse the stuck beater in the water up to where it connects in to the mixer and hold for about minute. Once the hot water has melted the build up you should be able to remove the beater. Hopefully this may work on your brand of mixer.
My older blakeslee mixer model b12 needs oil
The B-20 takes 50 SAE HD oil. I noticed that it doesn't stink like gear oil but is still pretty goopy. I think Mobil 1 Delvac is suggested. I think 30 weight would be fine for your machine, as well.
5/17/2012 2:55:11 PM •
Blakeslee...
•
Answered
on May 17, 2012
•
837 views
What kind of oil use this
I came across a manual for a Blakeslee f-40 60 80 and here is what it said. Hope this helps
Lubrication
The planetary and spiral-beveled gears are self-lubricated for life. The lubrication used is micromly grease and must be re-applied if gears are replaced. The transmission uses Mobil "delvic 1" synthetic oil which should last the normal life of the mixer. No lubrication is required for the auxiliary drive hub.
If lubrication is applied to the auxiliary hub a grease-like substance will possibly leak out causing damage to the product.
Applications of any lubrication will Void Warranty.
berkelsalesservice.com/PDFs/DD-40_60_80.pdf
1/9/2015 9:54:38 PM •
Blakeslee...
•
Answered
on Jan 09, 2015
•
613 views
I have a blakeslee cc15
Hi and welcome to fixYa, I am Kelly
This is the US support site for Blakeslee.
http://www.hfse.com/GetYourPart.html
Call 800-458-5593 or Fax 800-800-4981
They also have a Canadian site.
The link below has a
live chat feature where you can ask if they carry parts for the CC15 model:
http://www.hfse.com
Hopefully this will get you a source for your hook.
Thanks for choosing FixYa,
Kelly
2/23/2011 1:16:19 PM •
Blakeslee...
•
Answered
on Feb 23, 2011
•
179 views
Mixer DD-60 work's only on
Hi,
On these mixers, there could be few possibilities. It could be a faulty speed control plate, a blown capacitor or even hall effect sensor. The only way to diagnose is to open the machine. Them inspect and test the above mentioned components. Usually it is more due to plate or board level components.
Let me know,if needed further assistance.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!
Crypto peerless mixer model EL 20 I need a work shop manual
I've recently started exploring the use of cryptocurrencies and I'm curious about how to best use them for everyday transactions like buying goods and services. I know that it's getting more popular, but I'm not sure how it works in practice. Can anyone explain the best practices for using cryptocurrencies for payments? Are there specific platforms or methods that are more secure and user-friendly?
4/24/2024 8:34:52 PM •
Food Mixers
•
Answered
Yesterday
•
197 views
Not finding what you are looking for?