Questions & Answers for: wiper function

...wiper function inoperable This function does not work. When set to intermitent function wipers operate at full speed. When washer is pressed wipers will not shut off until car is turned off. Replaced ...

Ad

Question about 2001 Town & Country

1 Answer

...function switch and the wiper motor. I have also checked the two relays for the wiper. They both seem to work fine. No change. What else can I test/replace to fix my wipers? RICK check the wires from ...

Ad

Question about 2001 Town & Country

1 Answer

...will only run if you use the washer function. I have replaced the multi-function switch and the wiper motor. No change. What else can I test/replace to fix my wipers? you need to check the wiper ...

...speed, no intermittent function. All other functions OK. the wiper moter has a module on it and when they go bad it will do what yours is doing. i would replace the wiper module and it should fix

Question about 2002 Town Car

1 Answer

...Wiper motor. Multi-function switch. Circuitry. Wiper control module. GO to Pinpoint Test B . Voltage drop testing the power an ground circuits for the wiper control module would be a good place to ...

...wiper control module. Multi-function switch. Damaged circuitry. GO to Pinpoint Test C . Windshield Wipers Inoperative at Interval Setting Windshield wiper motor . Damaged windshield wiper control ...

function switches before attempting to repair the Front Wiper and Washer System. If both the right and left multi-function switch/SCM functions are ineffective, diagnose and repair that problem before

Wiper motor. Multi-function switch. Circuitry. Wiper control module. GO to Pinpoint Test B . PINPOINT TEST B: THE WIPERS ARE INOPERATIVE CONDITIONS DETAILS/RESULTS/ACTIONS B1 CHECK FUSE JUNCTION PANEL

Question about 2007 Compass 2.4

1 Answer

...function switch. Wiper motor. Circuitry. Wiper control module. GO to Pinpoint Test C . The High Wiper Speed Does Not Operate Properly Multi-function switch. Wiper motor. Circuitry. Wiper control ...

...function switch is in the ON position, the rear wiper relay is still activated, power is supplied to the rear wiper motor, and the wipe cycle starts again. If the multi-function switch is in the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...