Questions & Answers for: Kia upper radiator hose going 01

UPPER" Radiator Hose from the Radiator to the Engine Cylinder Head, The Thermostat Housing is the Unit that the UPPER Radiator Hose Connects to. Theres is 1 BOLT (TOP) & 1 NUT (BOTTOM) that you Remove

...hose it is in order to tell someone. it's to the right of the engine..lower maybe? its a radiator hose because it is connected to where you would add water to your engine. Upper coolant radiator

radiator should be disconnected fromt he cooling system (via the hoses) and then you can pull it out. It does not weigh much. Installation is the reverse of the removal. --- recalls for engine follow:

...upper radiator hose. Remove the 4 attaching nuts to the clutch fan. Remove the 5 fan shroud bolts. Remove the fan and shroud as an assembly. Remove the 4 splash guard mounting bolts and the splash ...

...upper radiator hose at the outlet on the motor, I cut about 1 1/2 inch off the radiator hose because I could not find the right upper hose, I drove the car and it ran cool for about 10Min's. the shot ...

...upper radiator hose, but my temperature gauge doesn't indicate overheating, what could be the problem? I have a 2005 Kia Sedona the coolant is leaking from the upper radiator hose, but my ...

...Kia sedona Follow the top radiator hose back from the radiator to the engine. It is under that connection on the engine block. The upper rad hose will connect to the t-stat housing and the ...

...upper radiator hose where it connects to the elbow on the engine block. Remove the hose from this connection Remove the 3 bolts on the elbow that the hose was on, where they connect to the engine ...

...upper radiator hose from engine block and fill that way without running the engine. Then when radiator is full meaning can no longer add coolant through hose reconnect hose start engine and add ...

...Upper radiator hose Loosen the clamps that connect the upper radiator hose to the housing and remove the hose. Remove the thermostat housing Loosen the thermostat housing mounting bolts. Remove the ...