Questions & Answers for: turn signal hazzard flasher relay

...turn signal switch is in position. My first idea is to check the fuse for the circuit. If the fuse is okay, what should I check next? Check the flasher under the dash to the left of the steering ...

...flasher's work. fuses appear to be good, location of turn signal relay unknown . this is son's vehicle sounds like the flasher unit needs replacing , the hazzard circuit has its own flasher unit

...Signal Indicators don't light up, when trying to signal. If hazzards are turned on everything works. There may be a seperate flasher relay for the turn signals. usually located around the fuse

turn signal fuse is good. i can't find the signal flasher relay. i tested the turn signal switch with a multi meter and i think it's ok. it's a 1991 dodge daytona. please help! the fuse might be good,

...the signal flasher unit is bad. turn on hazard flasher and locate clicking unit.the signal unit is right next to it under the dash and are interchangable .if that makes signals work then you fixed ...

...the turn signal switch . if it stops or changes, you have a bad turn signal switch. the hazzard and the turn signals operate through the hazzard switch..it has a built in relay.hope this was ...

...turn signal/hazzard lamps) ON and OFF to "flash" them. Just another of the MANY things that the manufacturers are doing in an effort to FORCE you to bring your vehicle to the dealership for repair. ...

and hazzards won't work but the brake lights and tail lights still work even when the turn/hazzard lights aren't... can anyone help me??? Replace the electronic flasher relay to cure this

...turn signal flasher unit on a 1992 plymouth acclaim We have no turn signals at all and no hazzard lights at all. We tried turning on the left signal and then the right and nothing. Then we tried the ...

...turn signal switch assembly i can hear the flasher when i turn on the blinker but nothing on dash or outside the car and the hazzards dont work at all and can not hear the flasher when trying to work ...