Questions & Answers for: Ford Focus turbo over boost

...turbo charged vehicle will ensure proper operation and have less risk of breaking down, as well as damaging components. To help regulate the air intake pressure a device called a waste-gate is ...

boost controller works by vaccum pressure on some turbo engines and if it loses vaccum to the controller it dumps all turbo pressure out exhaust instead of intake. I would check that if it were me. It

...to turbo charge my 2001 ford focus zx3, DOHC 2.0l Zetec. i have the full turbo kit, includes turbo, wastegate, intercooler, BOV, boost controller, piping, oil feed line, boost gauge etc. ...

...turbo would spool and build boost, the mass fair flow sensor would read all this air coming in and tell the ECU to dial up the the appropriate amount of fuel. When the air reached the cracks in the ...

...boost other times revs limit to 2k and car struggles to pull away at bite almost stalling or else the revs will limit and bounce at 2k no turbo. any ideas thanks tddi mondeo 51 plate Hi,you need to ...

ford focus 1.8 tdci i have the fault codes p2263 and p2263p. what do these mean It means the turbo/supercharge boost system is malfunctioning. Have it checked.

...ideas, thanks steve The wastegate may be mal-adjusted now after fitting the new turbo, it sounds like it is shunting boost pressure down the exhaust thru the wastegate valve which is vacuum

...to turbocharger (TC) boost pressure/supercharger (SC) boost pressure ---performance problems ===cause--- mechanical fault check for leaking interchange hoses , interchanger split or turbo ...

...friend unplugged but didnt blank. hence no turbo boost limp mode all time If he unplugged it, then it needs plugged back in and the problem needs fixed. Actuators are controlled by the PCM, Not

...turbo not working)and car goes into "limp" mode. No warning light appears and the car Loss of power thats sounds like a possible boost control solenoid failure.when the boost solenoid fails it wont ...