Question about 2007 Focus (3 Door) Hatchback
...pop the trunk and you should see a screw near the grommet holding the light in place... there's also a screw that you can turn by hand inside the trunk just underneath where the light is..... once ...
pop open. Is there a way to get into the trunk or a way to fold the interior back seats down without accsessing the release inside the trunk? please have the door lock check out!- that is a mechanical
...pop the lock its just a clicking sound and my light in my trunk is running my battery dead so i wanted to know did you know what the wire look like so i can cut the light off in the trunk? Hi there, ...
trunk / boot) and using a small pointed tool , pop out the center of the retaining clips to loosen them to allow access behind the interior trunk liner. This should allow you access to the rear of the
i can no longer open my trunk on my vehicle. help! it's been almost 11 months since i've been able to open the trunk and i've been dealing with it but now my break light is out and the only way i can ...
...pop trunk or not. I will be more than happy to help. My keys Are in the truck so I can't use my keys to unlock the truck and I need to know how can I let down my backseats on my 2004 Ford focus so I ...
pop the trunk. Nothing happens So your trunk release button on the dash dpesn't seem to open the trunk.Does your key fob button open the trunk? yes....then could be problem with switch but read on
Question about 2000 Focus
...pop out the side panels you might gain accessories to the rear deck bolts that the third brake light is attached to and radio speakers if applicable anyway you should be able to axcess the trunk by ...
Question about 2013 Focus
The trunk on my 2013 Ford focus randomly pops open while driving on highways, what could the cause be and how can I fix it? If y.ou have an electric release for the trunk, then unplug it and use the ...
Question about 2013 Focus
theh trunk on my 2013 ford focus randomly pops open while driving on highways , what could the cause be and how can i fit it ? The striker assembly may be out of adjustment. This is the metal piece ...
Usually answered in minutes!
3,749 Questions
2,612 Questions
2,055 Questions
1,226 Questions
897 Questions